mibuso.com
Home› Download section

Service Tier Administration Tool v3.4.0

1356789

Comments

  • clienauclienau Member Posts: 57
    Ok i have test it.

    The problem is that the ServiceTierAdministrationTool starts the RTC with start parameters.

    I must check if the start parameters of the RTC contains the option to give the Credential Type and Certificate Name in DNSIdentity.

    But i haven't found something like this at the moment.

    I can change the tool to create a Setting.config at runtime and use the settings file in start parameter.
    Then i must implement an own config section for the client setting to change the different settings per ServiceTier, because the DNSIdentity can be different from one NST to other NST.

    I have add this to my next release list.

    Best Regards
  • AdministratorAdministrator Member, Moderator, Administrator Posts: 2,500
    Service Tier Administration Tool v2.0.8
    A free Service Tier Administration Tool.
    All functionalities are working on LOCAL and REMOTE machines when you have the administration rights to that machine.
    Installing, Uninstalling, Start, Stop, Restart and dynamic change of settings like Portsharing, Account, start mode and settings in the CustomSettings.config of the Service Tier.

    The version informations of the different Services Tiers are listed.

    Direct connect with a configured Role Tailored Client to a selected Service Tier.

    Auto update functionality integrated when a newer version will be available.

    Version 2.0.8 (2012-01-28):
    - NEW: Client User Settings configuration section. The StartRTC functionality will generate an client config setting file and use this instead of the standard ClientUserSettings.config. These settings get the parameter from the selected NST automatically and from the "RTC - Client User Setting" configuration section. If no settings configured the default settings will be used.
    - FIX: Company settings. Company settings will be saved only for the BaseService now. The WS will use the the BaseService configurations for 2009 NST.

    Version 2.0.6 (2012-12-07):
    - NEW: NST that are detected with errors will now be marked with error flag and the Service Tier Administration Tool continue working without an error message.
    - NEW: Column "Error".
    - NEW: NST with errors can be deleted now.
    - FIX: "Update Service" functionality works correct now with NST 2013.
    - FIX: "Update Service" functionality checks Major Version.
    - FIX: Change Account functionality doesn't show an InvalidOperationException anymore. The password will be changed now correctly.

    Version 2.0.5 (2012-11-22):
    - FIX: RTC and NST Version Settings

    Version 2.0.4 (2012-11-22):
    - FIX: string constants like filename will not compare for case sensitive anymore.
    - Default name works now for creation of 2013 Instances.

    Version 2.0.3 (2012-11-19):
    - Columns can be hide with the FieldChooser Button in the Left Upper Corner of the Service List.
    - Default Display Service Name can be configured in the Settings.
    - Default Display WS Service Name can be configured in the Settings.
    - Auto collapse disabled. Only after grouped or connect to a machine the auto collapse functionality will be triggered.
    - Company button visibility fixed.

    Version 2.0.2 (2012-11-11):
    - Update routines improved.
    - Company can now be saved for selected service.

    Version 2.0.1 (2012-11-08):
    - Only one Header line for grouping.
    - Fix a bug for installing an Instance of 2013 in folder with spaces

    Version 2.0.0 (2012-11-07):
    - Completly Redesign.
    - Full support for Microsoft Dynamics NAV 2013.
    - Full support for Microsoft Dynamics NAV 2009.
    - Auto insert/update/remove acl and firewall ports over netsh.
    - Create Instances for Microsoft Dynamics NAV 2013.
    - All new configuration settings integrated with Description.
    - All configured Grid settings will be reapply after restart.
    - New setup and update routine.

    IMPORTANT: No acl and firewall support for OSVersion < 6 at the moment. Use httpcfg manually.

    *HINT* Use the GroupBy functionality of the datagrid.
    Drag a column to the Group Header for grouping.
    Example: This functionality has great effect on column "Base Service Name".

    Version 1.5.5 (2012-07-03):
    - Fix Update problem. Build Version corrected.

    Version 1.5.4 (2012-07-02):
    - Fix NAV 2013 problems.
    - Fix some wrong button status.
    - Multi selection for some functionalities available.
    - Set default file Name in NST Settings and RTC Settings.

    Version 1.5.2 (2012-04-26):
    - Windows 8 compatible
    - New Setting for "ServicesCultureDefaultUserPersonalization"

    Version 1.5.1 (2012-03-05):
    - Fix service list update bug.
    - Update process stops now when an error occurs and shows a Message with the problem.

    Version 1.5.0 (2012-02-23):
    - Fix problem with service state.
    - Update of service states improved.

    Version 1.4.3 (2012-02-10):
    - Fix config problem with remote machines

    Version 1.4.2 (2012-02-09):
    - Fix crash in "NST Settings" and "RTC Settings" after double click the column seperator for auto arrange the columns.
    - PortSharing Service will be checked before a NST will be start with Port Sharing enabled.
    - Fix a Bug when the Microsoft Default Services will be remove.
    - Remove the direct import from the CustomSettings.config file. Now the NST Settings will be checked for the correct config file in the AppSettings Section.

    Version 1.4.1 (2012-01-16):
    - Fix crash after use the "Create Service" or "Update Service" function without configured the NST Settings.

    Version 1.4.0. (2012-01-16):
    - Save button removed. Autosave configuration settings.
    - NEW "NST Settings" to configure different NST Versions as base for "Create Service" and "Update Service" function.
    - NEW "Update Service" function. Easy Updating of NST's with the configured NST's in the "NST Settings"

    Version 1.3.0. (2011-11-24):
    - Default Company for RTC connection can be configured.
    - More settings available.
    - Update routines don't crash anymore when the connection to a server is lost.
    - Tooltip integrated for settings on label and textbox.

    http://www.mibuso.com/dlinfo.asp?FileID=1410

    Discuss this download here.
  • AdministratorAdministrator Member, Moderator, Administrator Posts: 2,500
    Service Tier Administration Tool v2.0.9
    A free Service Tier Administration Tool.
    All functionalities are working on LOCAL and REMOTE machines when you have the administration rights to that machine.
    Installing, Uninstalling, Start, Stop, Restart and dynamic change of settings like Portsharing, Account, start mode and settings in the CustomSettings.config of the Service Tier.

    The version informations of the different Services Tiers are listed.

    Direct connect with a configured Role Tailored Client to a selected Service Tier.

    Auto update functionality integrated when a newer version will be available.

    Version 2.0.9 (2013-02-07):
    - NEW: Application Eventlog filtered to Navision messages
    - NEW: Direct open configuration file with notepad.
    - FIX: ClientServicesIdleClientTimeout issue.
    - FIX: minor UI and handling issues.

    Version 2.0.8 (2013-01-28):
    - NEW: Client User Settings configuration section. The StartRTC functionality will generate an client config setting file and use this instead of the standard ClientUserSettings.config. These settings get the parameter from the selected NST automatically and from the "RTC - Client User Setting" configuration section. If no settings configured the default settings will be used.
    - FIX: Company settings. Company settings will be saved only for the BaseService now. The WS will use the the BaseService configurations for 2009 NST.

    Version 2.0.6 (2012-12-07):
    - NEW: NST that are detected with errors will now be marked with error flag and the Service Tier Administration Tool continue working without an error message.
    - NEW: Column "Error".
    - NEW: NST with errors can be deleted now.
    - FIX: "Update Service" functionality works correct now with NST 2013.
    - FIX: "Update Service" functionality checks Major Version.
    - FIX: Change Account functionality doesn't show an InvalidOperationException anymore. The password will be changed now correctly.

    Version 2.0.5 (2012-11-22):
    - FIX: RTC and NST Version Settings

    Version 2.0.4 (2012-11-22):
    - FIX: string constants like filename will not compare for case sensitive anymore.
    - Default name works now for creation of 2013 Instances.

    Version 2.0.3 (2012-11-19):
    - Columns can be hide with the FieldChooser Button in the Left Upper Corner of the Service List.
    - Default Display Service Name can be configured in the Settings.
    - Default Display WS Service Name can be configured in the Settings.
    - Auto collapse disabled. Only after grouped or connect to a machine the auto collapse functionality will be triggered.
    - Company button visibility fixed.

    Version 2.0.2 (2012-11-11):
    - Update routines improved.
    - Company can now be saved for selected service.

    Version 2.0.1 (2012-11-08):
    - Only one Header line for grouping.
    - Fix a bug for installing an Instance of 2013 in folder with spaces

    Version 2.0.0 (2012-11-07):
    - Completly Redesign.
    - Full support for Microsoft Dynamics NAV 2013.
    - Full support for Microsoft Dynamics NAV 2009.
    - Auto insert/update/remove acl and firewall ports over netsh.
    - Create Instances for Microsoft Dynamics NAV 2013.
    - All new configuration settings integrated with Description.
    - All configured Grid settings will be reapply after restart.
    - New setup and update routine.

    IMPORTANT: No acl and firewall support for OSVersion < 6 at the moment. Use httpcfg manually.

    *HINT* Use the GroupBy functionality of the datagrid.
    Drag a column to the Group Header for grouping.
    Example: This functionality has great effect on column "Base Service Name".

    Version 1.5.5 (2012-07-03):
    - Fix Update problem. Build Version corrected.

    Version 1.5.4 (2012-07-02):
    - Fix NAV 2013 problems.
    - Fix some wrong button status.
    - Multi selection for some functionalities available.
    - Set default file Name in NST Settings and RTC Settings.

    Version 1.5.2 (2012-04-26):
    - Windows 8 compatible
    - New Setting for "ServicesCultureDefaultUserPersonalization"

    Version 1.5.1 (2012-03-05):
    - Fix service list update bug.
    - Update process stops now when an error occurs and shows a Message with the problem.

    Version 1.5.0 (2012-02-23):
    - Fix problem with service state.
    - Update of service states improved.

    Version 1.4.3 (2012-02-10):
    - Fix config problem with remote machines

    Version 1.4.2 (2012-02-09):
    - Fix crash in "NST Settings" and "RTC Settings" after double click the column seperator for auto arrange the columns.
    - PortSharing Service will be checked before a NST will be start with Port Sharing enabled.
    - Fix a Bug when the Microsoft Default Services will be remove.
    - Remove the direct import from the CustomSettings.config file. Now the NST Settings will be checked for the correct config file in the AppSettings Section.

    Version 1.4.1 (2012-01-16):
    - Fix crash after use the "Create Service" or "Update Service" function without configured the NST Settings.

    Version 1.4.0. (2012-01-16):
    - Save button removed. Autosave configuration settings.
    - NEW "NST Settings" to configure different NST Versions as base for "Create Service" and "Update Service" function.
    - NEW "Update Service" function. Easy Updating of NST's with the configured NST's in the "NST Settings"

    Version 1.3.0. (2011-11-24):
    - Default Company for RTC connection can be configured.
    - More settings available.
    - Update routines don't crash anymore when the connection to a server is lost.
    - Tooltip integrated for settings on label and textbox.

    http://www.mibuso.com/dlinfo.asp?FileID=1410

    Discuss this download here.
  • JDVyskaJDVyska Member Posts: 179
    It's a super basic primer on the use, not going into 2009 with multiple builds or 2013, but the 'how-to' is up:

    http://www.youtube.com/watch?v=Z5wf2J6FyRI

    I plan to do another talking to mixed builds, and later 2013.
    JEREMY VYSKA
    CEO, Spare Brained Ideas, Göteborg, Sweden
    New (April 2021) Getting Started with Microsoft Dynamics 365 Business Central Book Available: "Your First 20 Hours with Business Central"
  • krikikriki Member, Moderator Posts: 9,115
    Some extra requests for the service tier. Although it is almost outdated...

    -Can you add support to start the classic client for NAV2009R2?
    -Can you add support to de/install a NAS for NAV2009R2 (and the possibility to start it from DOS without using a service)? My howto is useful to install it, but if it is possible to integrate it in your tool, it is a lot easier.
    Regards,Alain Krikilion
    No PM,please use the forum. || May the <SOLVED>-attribute be in your title!

  • AdministratorAdministrator Member, Moderator, Administrator Posts: 2,500
    Service Tier Administration Tool v2.0.10
    A free Service Tier Administration Tool.
    All functionalities are working on LOCAL and REMOTE machines when you have the administration rights to that machine.
    Installing, Uninstalling, Start, Stop, Restart and dynamic change of settings like Portsharing, Account, start mode and settings in the CustomSettings.config of the Service Tier.

    The version informations of the different Services Tiers are listed.

    Direct connect with a configured Role Tailored Client to a selected Service Tier.

    Auto update functionality integrated when a newer version will be available.

    Version 2.0.10 (2013-03-14):
    - NEW: Start Developer Environment(Classic) based on NST

    Version 2.0.9 (2013-02-07):
    - NEW: Application Eventlog filtered to Navision messages
    - NEW: Direct open configuration file with notepad.
    - FIX: ClientServicesIdleClientTimeout issue.
    - FIX: minor UI and handling issues.

    Version 2.0.8 (2013-01-28):
    - NEW: Client User Settings configuration section. The StartRTC functionality will generate an client config setting file and use this instead of the standard ClientUserSettings.config. These settings get the parameter from the selected NST automatically and from the "RTC - Client User Setting" configuration section. If no settings configured the default settings will be used.
    - FIX: Company settings. Company settings will be saved only for the BaseService now. The WS will use the the BaseService configurations for 2009 NST.

    Version 2.0.6 (2012-12-07):
    - NEW: NST that are detected with errors will now be marked with error flag and the Service Tier Administration Tool continue working without an error message.
    - NEW: Column "Error".
    - NEW: NST with errors can be deleted now.
    - FIX: "Update Service" functionality works correct now with NST 2013.
    - FIX: "Update Service" functionality checks Major Version.
    - FIX: Change Account functionality doesn't show an InvalidOperationException anymore. The password will be changed now correctly.

    Version 2.0.5 (2012-11-22):
    - FIX: RTC and NST Version Settings

    Version 2.0.4 (2012-11-22):
    - FIX: string constants like filename will not compare for case sensitive anymore.
    - Default name works now for creation of 2013 Instances.

    Version 2.0.3 (2012-11-19):
    - Columns can be hide with the FieldChooser Button in the Left Upper Corner of the Service List.
    - Default Display Service Name can be configured in the Settings.
    - Default Display WS Service Name can be configured in the Settings.
    - Auto collapse disabled. Only after grouped or connect to a machine the auto collapse functionality will be triggered.
    - Company button visibility fixed.

    Version 2.0.2 (2012-11-11):
    - Update routines improved.
    - Company can now be saved for selected service.

    Version 2.0.1 (2012-11-08):
    - Only one Header line for grouping.
    - Fix a bug for installing an Instance of 2013 in folder with spaces

    Version 2.0.0 (2012-11-07):
    - Completly Redesign.
    - Full support for Microsoft Dynamics NAV 2013.
    - Full support for Microsoft Dynamics NAV 2009.
    - Auto insert/update/remove acl and firewall ports over netsh.
    - Create Instances for Microsoft Dynamics NAV 2013.
    - All new configuration settings integrated with Description.
    - All configured Grid settings will be reapply after restart.
    - New setup and update routine.

    IMPORTANT: No acl and firewall support for OSVersion < 6 at the moment. Use httpcfg manually.

    *HINT* Use the GroupBy functionality of the datagrid.
    Drag a column to the Group Header for grouping.
    Example: This functionality has great effect on column "Base Service Name".

    Version 1.5.5 (2012-07-03):
    - Fix Update problem. Build Version corrected.

    Version 1.5.4 (2012-07-02):
    - Fix NAV 2013 problems.
    - Fix some wrong button status.
    - Multi selection for some functionalities available.
    - Set default file Name in NST Settings and RTC Settings.

    Version 1.5.2 (2012-04-26):
    - Windows 8 compatible
    - New Setting for "ServicesCultureDefaultUserPersonalization"

    Version 1.5.1 (2012-03-05):
    - Fix service list update bug.
    - Update process stops now when an error occurs and shows a Message with the problem.

    Version 1.5.0 (2012-02-23):
    - Fix problem with service state.
    - Update of service states improved.

    Version 1.4.3 (2012-02-10):
    - Fix config problem with remote machines

    Version 1.4.2 (2012-02-09):
    - Fix crash in "NST Settings" and "RTC Settings" after double click the column seperator for auto arrange the columns.
    - PortSharing Service will be checked before a NST will be start with Port Sharing enabled.
    - Fix a Bug when the Microsoft Default Services will be remove.
    - Remove the direct import from the CustomSettings.config file. Now the NST Settings will be checked for the correct config file in the AppSettings Section.

    Version 1.4.1 (2012-01-16):
    - Fix crash after use the "Create Service" or "Update Service" function without configured the NST Settings.

    Version 1.4.0. (2012-01-16):
    - Save button removed. Autosave configuration settings.
    - NEW "NST Settings" to configure different NST Versions as base for "Create Service" and "Update Service" function.
    - NEW "Update Service" function. Easy Updating of NST's with the configured NST's in the "NST Settings"

    Version 1.3.0. (2011-11-24):
    - Default Company for RTC connection can be configured.
    - More settings available.
    - Update routines don't crash anymore when the connection to a server is lost.
    - Tooltip integrated for settings on label and textbox.

    http://www.mibuso.com/dlinfo.asp?FileID=1410

    Discuss this download here.
  • krikikriki Member, Moderator Posts: 9,115
    Another problem with performance of rebuilding of the screens and especially selecting the lines using a slow-connection remote desktop.

    This is my situation:
    From my PC I connect to a remote server (server "A") using remote desktop. This connection is done over the internet having a low-speed connection.
    From that server "A",I connect to another server (server "B") using, again, remote desktop. This connection is over LAN, so it is fast.

    The problem is that the change in colour of the selected servicetier is very slow to go over that slow connection. It should be possible to disable that colouring (via a setup?) to speed up the selecting of a servicetier. After all, there is still the little triangle that shows the selected servicetier.
    Regards,Alain Krikilion
    No PM,please use the forum. || May the <SOLVED>-attribute be in your title!

  • krikikriki Member, Moderator Posts: 9,115
    Some other problem came up:

    when launching the classic client/development client from the tool, one of my colleagues has this error:
    Microsoft Dynamics NAV Development Environment
    "yes" non è un'opzione.

    Le opzioni esistenti sono:

    No, Sì
    OK

    Solution:
    When you create the string to run the classic client/development client, don't use Yes or No, but use 1 or 0. This works in all languages.

    BTW: I don't have the problem, because I have all in English :D
    Regards,Alain Krikilion
    No PM,please use the forum. || May the <SOLVED>-attribute be in your title!

  • krikikriki Member, Moderator Posts: 9,115
    And continue with a request:

    Can you add the possibility to create the following files:
    -command file with dos-command and parameters you use to start the development environment/classic client
    -command file with dos-command and parameters you use to start the RTC/Windows Client
    -config file you use to start the RTC/Windows Client
    Regards,Alain Krikilion
    No PM,please use the forum. || May the <SOLVED>-attribute be in your title!

  • GreatScott000GreatScott000 Member Posts: 40
    I continue to really like this tool. However, I do have a couple of suggestions. It would be nice to specify the default Service Startup. I always use manual and I have to change it every time. Also being able to default the Startup account would be nice. Being able to multi-select services for start/stop/delete would be nice too.

    One minor "issue" the setting for Default WS Service Name seems to truncate after the replacement. E.g If I have "NAV Server [%1] WS" as the default setting when it creates the service name it seems to lose " WS". By putting the WS at the end I can sort the services by name and makes things easier to find.
  • zoechiang1zoechiang1 Member Posts: 1
    Hi,
    When I use this tool connect to remote server. I cannot start the RTC or classic from this tool. I can see the services but the "Start RTC","Start Classic" buttons are disabled;I can connect remote service manually from RTC client and the tool works fine on local machine.
    Did I miss any configuration on this tool?

    Thanks a lot
    Zoe
  • clienauclienau Member Posts: 57
    Thanks for all requests, issues and improvments.

    Sry, but i have many projects at the moment. I hope that i can fix the issues and some improvements in the next days.

    Best Regards.
  • GreatScott000GreatScott000 Member Posts: 40
    I am trying to create a service on a remote computer. I have a shared folder on the remote machine I want to have the service created in. When I specify the share in the Target folder I get:
    Target folder is not on the target machine
    I have given users access to the shared folder "Full Control", and I am in the local administrators group on the remote machine.

    If I map a drive to the shared folder, I get:
    Target folder is not a UNC Path

    Any other suggestions?

    The reason I am doing this is to try and limit access to the remote machine but allow "general" users to create/manage their own services.
  • GreatScott000GreatScott000 Member Posts: 40
    Another question, is there any way to default the "Computer" to be a server other than localhost.
  • GreatScott000GreatScott000 Member Posts: 40
    I have created services on a remote computer. When I highlight a 2009 service Start/Stop service buttons are enabled. When I highlight a 2013 service these buttons are disabled. Any ideas?
  • clienauclienau Member Posts: 57
    I am trying to create a service on a remote computer. I have a shared folder on the remote machine I want to have the service created in. When I specify the share in the Target folder I get:
    Quote:
    Target folder is not on the target machine

    I have given users access to the shared folder "Full Control", and I am in the local administrators group on the remote machine.

    If I map a drive to the shared folder, I get:
    Quote:
    Target folder is not a UNC Path


    Any other suggestions?

    The reason I am doing this is to try and limit access to the remote machine but allow "general" users to create/manage their own services.

    Sorry but this doesn't work. This Tool can only Create Services on the actual connected machine. The user must have admin rights to get the WMI informations (List of services) of the remote machine.
    One minor "issue" the setting for Default WS Service Name seems to truncate after the replacement. E.g If I have "NAV Server [%1] WS" as the default setting when it creates the service name it seems to lose " WS". By putting the WS at the end I can sort the services by name and makes things easier to find.

    I can not reproduce this issue or i have missunderstand your problem. Can you rewrite it or send me a little video or screenshots. Thanks.
    I have created services on a remote computer. When I highlight a 2009 service Start/Stop service buttons are enabled. When I highlight a 2013 service these buttons are disabled. Any ideas?

    Please look at the column "Error" is this enabled? If it is enabled there is a problem with some settings of this service.
  • GreatScott000GreatScott000 Member Posts: 40
    The issue with the truncation of the WS name appears to have been human error. I can't reproduce it.

    RE: unable to start 2013 services. There are no errors in the list and if I connect to the machine where the services reside I can use STA to start/stop them. I did just notice that there is 1 2013 service I can start/stop and that is the "default" one that is installed by the Setup. All the other 2013 services are "Instances" of that one. It is the instances I can not start from a remote server.
  • AdministratorAdministrator Member, Moderator, Administrator Posts: 2,500
    Service Tier Administration Tool v2.0.11
    A free Service Tier Administration Tool.
    All functionalities are working on LOCAL and REMOTE machines when you have the administration rights to that machine.
    Installing, Uninstalling, Start, Stop, Restart and dynamic change of settings like Portsharing, Account, start mode and settings in the CustomSettings.config of the Service Tier.

    The version informations of the different Services Tiers are listed.

    Direct connect with a configured Role Tailored Client to a selected Service Tier.

    Auto update functionality integrated when a newer version will be available.

    Version 2.0.11 (2013-05-23):
    - FIX: ClientServicesIdleClientTimeout issue for Navision 2013 NST.
    - FIX: "Start Classic" parameter language problem.
    - ADD: Remote Desktop graphic improvements.
    - ADD: Computer list.
    - ADD: Last Computer will be connected at startup.
    - UPDATE: Performance of EventlogView improved.

    Version 2.0.10 (2013-03-14):
    - NEW: Start Developer Environment(Classic) based on NST

    Version 2.0.9 (2013-02-07):
    - NEW: Application Eventlog filtered to Navision messages
    - NEW: Direct open configuration file with notepad.
    - FIX: ClientServicesIdleClientTimeout issue.
    - FIX: minor UI and handling issues.

    Version 2.0.8 (2013-01-28):
    - NEW: Client User Settings configuration section. The StartRTC functionality will generate an client config setting file and use this instead of the standard ClientUserSettings.config. These settings get the parameter from the selected NST automatically and from the "RTC - Client User Setting" configuration section. If no settings configured the default settings will be used.
    - FIX: Company settings. Company settings will be saved only for the BaseService now. The WS will use the the BaseService configurations for 2009 NST.

    Version 2.0.6 (2012-12-07):
    - NEW: NST that are detected with errors will now be marked with error flag and the Service Tier Administration Tool continue working without an error message.
    - NEW: Column "Error".
    - NEW: NST with errors can be deleted now.
    - FIX: "Update Service" functionality works correct now with NST 2013.
    - FIX: "Update Service" functionality checks Major Version.
    - FIX: Change Account functionality doesn't show an InvalidOperationException anymore. The password will be changed now correctly.

    Version 2.0.5 (2012-11-22):
    - FIX: RTC and NST Version Settings

    Version 2.0.4 (2012-11-22):
    - FIX: string constants like filename will not compare for case sensitive anymore.
    - Default name works now for creation of 2013 Instances.

    Version 2.0.3 (2012-11-19):
    - Columns can be hide with the FieldChooser Button in the Left Upper Corner of the Service List.
    - Default Display Service Name can be configured in the Settings.
    - Default Display WS Service Name can be configured in the Settings.
    - Auto collapse disabled. Only after grouped or connect to a machine the auto collapse functionality will be triggered.
    - Company button visibility fixed.

    Version 2.0.2 (2012-11-11):
    - Update routines improved.
    - Company can now be saved for selected service.

    Version 2.0.1 (2012-11-08):
    - Only one Header line for grouping.
    - Fix a bug for installing an Instance of 2013 in folder with spaces

    Version 2.0.0 (2012-11-07):
    - Completly Redesign.
    - Full support for Microsoft Dynamics NAV 2013.
    - Full support for Microsoft Dynamics NAV 2009.
    - Auto insert/update/remove acl and firewall ports over netsh.
    - Create Instances for Microsoft Dynamics NAV 2013.
    - All new configuration settings integrated with Description.
    - All configured Grid settings will be reapply after restart.
    - New setup and update routine.

    IMPORTANT: No acl and firewall support for OSVersion < 6 at the moment. Use httpcfg manually.

    *HINT* Use the GroupBy functionality of the datagrid.
    Drag a column to the Group Header for grouping.
    Example: This functionality has great effect on column "Base Service Name".

    Version 1.5.5 (2012-07-03):
    - Fix Update problem. Build Version corrected.

    Version 1.5.4 (2012-07-02):
    - Fix NAV 2013 problems.
    - Fix some wrong button status.
    - Multi selection for some functionalities available.
    - Set default file Name in NST Settings and RTC Settings.

    Version 1.5.2 (2012-04-26):
    - Windows 8 compatible
    - New Setting for "ServicesCultureDefaultUserPersonalization"

    Version 1.5.1 (2012-03-05):
    - Fix service list update bug.
    - Update process stops now when an error occurs and shows a Message with the problem.

    Version 1.5.0 (2012-02-23):
    - Fix problem with service state.
    - Update of service states improved.

    Version 1.4.3 (2012-02-10):
    - Fix config problem with remote machines

    Version 1.4.2 (2012-02-09):
    - Fix crash in "NST Settings" and "RTC Settings" after double click the column seperator for auto arrange the columns.
    - PortSharing Service will be checked before a NST will be start with Port Sharing enabled.
    - Fix a Bug when the Microsoft Default Services will be remove.
    - Remove the direct import from the CustomSettings.config file. Now the NST Settings will be checked for the correct config file in the AppSettings Section.

    Version 1.4.1 (2012-01-16):
    - Fix crash after use the "Create Service" or "Update Service" function without configured the NST Settings.

    Version 1.4.0. (2012-01-16):
    - Save button removed. Autosave configuration settings.
    - NEW "NST Settings" to configure different NST Versions as base for "Create Service" and "Update Service" function.
    - NEW "Update Service" function. Easy Updating of NST's with the configured NST's in the "NST Settings"

    Version 1.3.0. (2011-11-24):
    - Default Company for RTC connection can be configured.
    - More settings available.
    - Update routines don't crash anymore when the connection to a server is lost.
    - Tooltip integrated for settings on label and textbox.

    http://www.mibuso.com/dlinfo.asp?FileID=1410

    Discuss this download here.
  • Johannes_NielsenJohannes_Nielsen Member Posts: 206
    Hi

    Great work on this tool, it very neat :thumbsup:

    I do have a problem though, I have a local server running 2009 and 2013 tiers.

    I can control the 2009, but the 2013 instances, I have no control over.
    They appear on the list, but I cannot Restart, Change Account or anything.

    Is this a permission issue?
    Best regards / Venlig hilsen
    Johannes Sebastian
    MB7-840,MB7-841
  • clienauclienau Member Posts: 57
    I don't know exactly.

    Which operation system?

    Did the services mark with an "Error" ? There is a column "Error".

    Can you send me a Screenshot? Please make all Columns visible with the FieldColumnChooser in the left upper corner of the Grid.

    I need "Service Path" and "Config Path".

    I can't reproduce the problem.

    Best Regards
  • Johannes_NielsenJohannes_Nielsen Member Posts: 206
    Hi

    No no error.

    The server i 2008 R2 Std - my desktop is Windows 8.

    Attached is screendump

    Sorry, but Mibuso only accepts images with max dimensions of 1024x768 :-k
    Best regards / Venlig hilsen
    Johannes Sebastian
    MB7-840,MB7-841
  • krikikriki Member, Moderator Posts: 9,115
    - FIX: "Start Classic" parameter language problem.
    This seems to work now.

    But there is another problem:
    When starting the classic client, you don't use the paremeter DATABASE INSTANCE.
    For example:
    Database Server=Localhost
    Database Instance=DEMO

    You start the client with "servername=Localhost" and it should be "servername=Localhost\DEMO".
    Regards,Alain Krikilion
    No PM,please use the forum. || May the <SOLVED>-attribute be in your title!

  • peterz84peterz84 Member Posts: 8
    I can control the 2009, but the 2013 instances, I have no control over.
    They appear on the list, but I cannot Restart, Change Account or anything.

    Same problem here!
  • clienauclienau Member Posts: 57
    New Version should solve the problems.

    Use AutoUpdate or wait until it is online by mibuso.

    Best Regards
  • AdministratorAdministrator Member, Moderator, Administrator Posts: 2,500
    Service Tier Administration Tool v2.0.12
    A free Service Tier Administration Tool.
    All functionalities are working on LOCAL and REMOTE machines when you have the administration rights to that machine.
    Installing, Uninstalling, Start, Stop, Restart and dynamic change of settings like Portsharing, Account, start mode and settings in the CustomSettings.config of the Service Tier.

    The version informations of the different Services Tiers are listed.

    Direct connect with a configured Role Tailored Client to a selected Service Tier.

    Auto update functionality integrated when a newer version will be available.

    Version 2.0.12 (2013-05-24):
    - NEW: Default Startup Type of installed service is configurable now.
    - UPDATE: Set default executables names in "RTC Settings", "NST Settings" and "Classic Settings".
    - FIX: "Create Instance" issues on remote machine.
    - FIX: "Delete Instance" issues on remote machine.
    - FIX: Problem with 2013 Instances.
    - FIX: For "Create Service" and "Create Instance" the target folder cannot be the location of a UNC drive for "LOCALHOST" (Local System)
    - FIX: "Start Classic" parameter with Database Instance of the NST.

    Version 2.0.11 (2013-05-23):
    - FIX: ClientServicesIdleClientTimeout issue for Navision 2013 NST.
    - FIX: "Start Classic" parameter language problem.
    - ADD: Remote Desktop graphic improvements.
    - ADD: Computer list.
    - ADD: Last Computer will be connected at startup.
    - UPDATE: Performance of EventlogView improved.

    Version 2.0.10 (2013-03-14):
    - NEW: Start Developer Environment(Classic) based on NST

    Version 2.0.9 (2013-02-07):
    - NEW: Application Eventlog filtered to Navision messages
    - NEW: Direct open configuration file with notepad.
    - FIX: ClientServicesIdleClientTimeout issue.
    - FIX: minor UI and handling issues.

    Version 2.0.8 (2013-01-28):
    - NEW: Client User Settings configuration section. The StartRTC functionality will generate an client config setting file and use this instead of the standard ClientUserSettings.config. These settings get the parameter from the selected NST automatically and from the "RTC - Client User Setting" configuration section. If no settings configured the default settings will be used.
    - FIX: Company settings. Company settings will be saved only for the BaseService now. The WS will use the the BaseService configurations for 2009 NST.

    Version 2.0.6 (2012-12-07):
    - NEW: NST that are detected with errors will now be marked with error flag and the Service Tier Administration Tool continue working without an error message.
    - NEW: Column "Error".
    - NEW: NST with errors can be deleted now.
    - FIX: "Update Service" functionality works correct now with NST 2013.
    - FIX: "Update Service" functionality checks Major Version.
    - FIX: Change Account functionality doesn't show an InvalidOperationException anymore. The password will be changed now correctly.

    Version 2.0.5 (2012-11-22):
    - FIX: RTC and NST Version Settings

    Version 2.0.4 (2012-11-22):
    - FIX: string constants like filename will not compare for case sensitive anymore.
    - Default name works now for creation of 2013 Instances.

    Version 2.0.3 (2012-11-19):
    - Columns can be hide with the FieldChooser Button in the Left Upper Corner of the Service List.
    - Default Display Service Name can be configured in the Settings.
    - Default Display WS Service Name can be configured in the Settings.
    - Auto collapse disabled. Only after grouped or connect to a machine the auto collapse functionality will be triggered.
    - Company button visibility fixed.

    Version 2.0.2 (2012-11-11):
    - Update routines improved.
    - Company can now be saved for selected service.

    Version 2.0.1 (2012-11-08):
    - Only one Header line for grouping.
    - Fix a bug for installing an Instance of 2013 in folder with spaces

    Version 2.0.0 (2012-11-07):
    - Completly Redesign.
    - Full support for Microsoft Dynamics NAV 2013.
    - Full support for Microsoft Dynamics NAV 2009.
    - Auto insert/update/remove acl and firewall ports over netsh.
    - Create Instances for Microsoft Dynamics NAV 2013.
    - All new configuration settings integrated with Description.
    - All configured Grid settings will be reapply after restart.
    - New setup and update routine.

    IMPORTANT: No acl and firewall support for OSVersion < 6 at the moment. Use httpcfg manually.

    *HINT* Use the GroupBy functionality of the datagrid.
    Drag a column to the Group Header for grouping.
    Example: This functionality has great effect on column "Base Service Name".

    Version 1.5.5 (2012-07-03):
    - Fix Update problem. Build Version corrected.

    Version 1.5.4 (2012-07-02):
    - Fix NAV 2013 problems.
    - Fix some wrong button status.
    - Multi selection for some functionalities available.
    - Set default file Name in NST Settings and RTC Settings.

    Version 1.5.2 (2012-04-26):
    - Windows 8 compatible
    - New Setting for "ServicesCultureDefaultUserPersonalization"

    Version 1.5.1 (2012-03-05):
    - Fix service list update bug.
    - Update process stops now when an error occurs and shows a Message with the problem.

    Version 1.5.0 (2012-02-23):
    - Fix problem with service state.
    - Update of service states improved.

    Version 1.4.3 (2012-02-10):
    - Fix config problem with remote machines

    Version 1.4.2 (2012-02-09):
    - Fix crash in "NST Settings" and "RTC Settings" after double click the column seperator for auto arrange the columns.
    - PortSharing Service will be checked before a NST will be start with Port Sharing enabled.
    - Fix a Bug when the Microsoft Default Services will be remove.
    - Remove the direct import from the CustomSettings.config file. Now the NST Settings will be checked for the correct config file in the AppSettings Section.

    Version 1.4.1 (2012-01-16):
    - Fix crash after use the "Create Service" or "Update Service" function without configured the NST Settings.

    Version 1.4.0. (2012-01-16):
    - Save button removed. Autosave configuration settings.
    - NEW "NST Settings" to configure different NST Versions as base for "Create Service" and "Update Service" function.
    - NEW "Update Service" function. Easy Updating of NST's with the configured NST's in the "NST Settings"

    Version 1.3.0. (2011-11-24):
    - Default Company for RTC connection can be configured.
    - More settings available.
    - Update routines don't crash anymore when the connection to a server is lost.
    - Tooltip integrated for settings on label and textbox.

    http://www.mibuso.com/dlinfo.asp?FileID=1410

    Discuss this download here.
  • krikikriki Member, Moderator Posts: 9,115
    Version 2.0.11 (2013-05-23):
    - ADD: Remote Desktop graphic improvements.

    This is still a problem: on a slow remote desktop connection, it is still slow when hovering over the different services. The reason is that when you hover over a service, the colour of the row changes. But it changes from white to blue passing through a lot of different shades of blue. Each change in shade is send over the connection and this slows down a lot.
    Regards,Alain Krikilion
    No PM,please use the forum. || May the <SOLVED>-attribute be in your title!

  • krikikriki Member, Moderator Posts: 9,115
    Another problem:
    If you start a service from services.msc and the user of that service has not yet the permission to run as service, Windows adds that permission automatically the first time.
    If I start the service with that user the first time from the service tier administration tool, the service does not start and I don't find anything in the eventlog.
    I found it out when I tried to start it from the services.msc and got the message that the permission was added.

    At least some message why the service didn't start would be useful.
    Regards,Alain Krikilion
    No PM,please use the forum. || May the <SOLVED>-attribute be in your title!

  • peterz84peterz84 Member Posts: 8
    New Version should solve the problems.

    Use AutoUpdate or wait until it is online by mibuso.

    Best Regards

    Works great, thank you!
  • AdministratorAdministrator Member, Moderator, Administrator Posts: 2,500
    Service Tier Administration Tool v2.0.13
    A free Service Tier Administration Tool.
    All functionalities are working on LOCAL and REMOTE machines when you have the administration rights to that machine.
    Installing, Uninstalling, Start, Stop, Restart and dynamic change of settings like Portsharing, Account, start mode and settings in the CustomSettings.config of the Service Tier.

    The version informations of the different Services Tiers are listed.

    Direct connect with a configured Role Tailored Client to a selected Service Tier.

    Auto update functionality integrated when a newer version will be available.

    Version 2.0.13 (2013-06-13):
    - NEW: Grid hoverless stlye implemented for better performance on remote sessions.
    - FIX: Setting ClientCredentialType on 2009 NST are available now and removed from ClientSettings.

    Version 2.0.12 (2013-05-24):
    - NEW: Default Startup Type of installed service is configurable now.
    - UPDATE: Set default executables names in "RTC Settings", "NST Settings" and "Classic Settings".
    - FIX: "Create Instance" issues on remote machine.
    - FIX: "Delete Instance" issues on remote machine.
    - FIX: Problem with 2013 Instances.
    - FIX: For "Create Service" and "Create Instance" the target folder cannot be the location of a UNC drive for "LOCALHOST" (Local System)
    - FIX: "Start Classic" parameter with Database Instance of the NST.

    Version 2.0.11 (2013-05-23):
    - FIX: ClientServicesIdleClientTimeout issue for Navision 2013 NST.
    - FIX: "Start Classic" parameter language problem.
    - ADD: Remote Desktop graphic improvements.
    - ADD: Computer list.
    - ADD: Last Computer will be connected at startup.
    - UPDATE: Performance of EventlogView improved.

    Version 2.0.10 (2013-03-14):
    - NEW: Start Developer Environment(Classic) based on NST

    Version 2.0.9 (2013-02-07):
    - NEW: Application Eventlog filtered to Navision messages
    - NEW: Direct open configuration file with notepad.
    - FIX: ClientServicesIdleClientTimeout issue.
    - FIX: minor UI and handling issues.

    Version 2.0.8 (2013-01-28):
    - NEW: Client User Settings configuration section. The StartRTC functionality will generate an client config setting file and use this instead of the standard ClientUserSettings.config. These settings get the parameter from the selected NST automatically and from the "RTC - Client User Setting" configuration section. If no settings configured the default settings will be used.
    - FIX: Company settings. Company settings will be saved only for the BaseService now. The WS will use the the BaseService configurations for 2009 NST.

    Version 2.0.6 (2012-12-07):
    - NEW: NST that are detected with errors will now be marked with error flag and the Service Tier Administration Tool continue working without an error message.
    - NEW: Column "Error".
    - NEW: NST with errors can be deleted now.
    - FIX: "Update Service" functionality works correct now with NST 2013.
    - FIX: "Update Service" functionality checks Major Version.
    - FIX: Change Account functionality doesn't show an InvalidOperationException anymore. The password will be changed now correctly.

    Version 2.0.5 (2012-11-22):
    - FIX: RTC and NST Version Settings

    Version 2.0.4 (2012-11-22):
    - FIX: string constants like filename will not compare for case sensitive anymore.
    - Default name works now for creation of 2013 Instances.

    Version 2.0.3 (2012-11-19):
    - Columns can be hide with the FieldChooser Button in the Left Upper Corner of the Service List.
    - Default Display Service Name can be configured in the Settings.
    - Default Display WS Service Name can be configured in the Settings.
    - Auto collapse disabled. Only after grouped or connect to a machine the auto collapse functionality will be triggered.
    - Company button visibility fixed.

    Version 2.0.2 (2012-11-11):
    - Update routines improved.
    - Company can now be saved for selected service.

    Version 2.0.1 (2012-11-08):
    - Only one Header line for grouping.
    - Fix a bug for installing an Instance of 2013 in folder with spaces

    Version 2.0.0 (2012-11-07):
    - Completly Redesign.
    - Full support for Microsoft Dynamics NAV 2013.
    - Full support for Microsoft Dynamics NAV 2009.
    - Auto insert/update/remove acl and firewall ports over netsh.
    - Create Instances for Microsoft Dynamics NAV 2013.
    - All new configuration settings integrated with Description.
    - All configured Grid settings will be reapply after restart.
    - New setup and update routine.

    IMPORTANT: No acl and firewall support for OSVersion < 6 at the moment. Use httpcfg manually.

    *HINT* Use the GroupBy functionality of the datagrid.
    Drag a column to the Group Header for grouping.
    Example: This functionality has great effect on column "Base Service Name".

    Version 1.5.5 (2012-07-03):
    - Fix Update problem. Build Version corrected.

    Version 1.5.4 (2012-07-02):
    - Fix NAV 2013 problems.
    - Fix some wrong button status.
    - Multi selection for some functionalities available.
    - Set default file Name in NST Settings and RTC Settings.

    Version 1.5.2 (2012-04-26):
    - Windows 8 compatible
    - New Setting for "ServicesCultureDefaultUserPersonalization"

    Version 1.5.1 (2012-03-05):
    - Fix service list update bug.
    - Update process stops now when an error occurs and shows a Message with the problem.

    Version 1.5.0 (2012-02-23):
    - Fix problem with service state.
    - Update of service states improved.

    Version 1.4.3 (2012-02-10):
    - Fix config problem with remote machines

    Version 1.4.2 (2012-02-09):
    - Fix crash in "NST Settings" and "RTC Settings" after double click the column seperator for auto arrange the columns.
    - PortSharing Service will be checked before a NST will be start with Port Sharing enabled.
    - Fix a Bug when the Microsoft Default Services will be remove.
    - Remove the direct import from the CustomSettings.config file. Now the NST Settings will be checked for the correct config file in the AppSettings Section.

    Version 1.4.1 (2012-01-16):
    - Fix crash after use the "Create Service" or "Update Service" function without configured the NST Settings.

    Version 1.4.0. (2012-01-16):
    - Save button removed. Autosave configuration settings.
    - NEW "NST Settings" to configure different NST Versions as base for "Create Service" and "Update Service" function.
    - NEW "Update Service" function. Easy Updating of NST's with the configured NST's in the "NST Settings"

    Version 1.3.0. (2011-11-24):
    - Default Company for RTC connection can be configured.
    - More settings available.
    - Update routines don't crash anymore when the connection to a server is lost.
    - Tooltip integrated for settings on label and textbox.

    http://www.mibuso.com/dlinfo.asp?FileID=1410

    Discuss this download here.
  • sebsidsebsid Member Posts: 27
    I don't know if it's only me but i'm experiencing that the tool is having a high CPU usage. We have a service tier server with probably 50 nav services and when we start the service tier admin tool it slows down the whole server and the CPU usage goes up remarkably. It was worse with previous versions but it's still a problem. Is this something you know anything about? Is someone else experiencing this problem?
Sign In or Register to comment.