-
Device License Limitations in BC 17/18
According to Microsoft licensing guide they write there are limitations to what a Device License can be used for, but not further details to be found on what the limitations are compared with a full user. Does anyone have more details on this? How does it work with Extension etc? From Microsoft: Device license: With a…
-
New CRM Integration with Mininum Synch. Frequency
There are extraordinary benefits to receiving massage chair Haruko treatments. It should be a part of everyday health and well-being. It certainly should not be viewed as always for a pampered lifestyle. It is really just a basic as brushing your teeth. Mẫu ghế mát xa Haruko is a natural way to improve your health,…
-
NAV Web Service Basic Authentication versus NTLM Auth.
We are integrating our new website (Demandware Platform) with NAV. Some of the integration is using xml files so I am set with that. But we do have a few live calls that the web site will make to NAV via web services. Turns out that the Demandware platform does not allow ntlm authentication. They would like to use Basic…
-
Getting error the MEM VAT Report Header does not exist when running BAS Report
Hello everyone, I am a newbie and not sure if I am posting this in the right place as I didn't find one for Business Central? I am getting the following error when using "Suggest Lines" in BAS Report. I understood the MEM has been disabled in Multi-Entity Management. I am in Australia so GST is applied and I don't use VAT.…
-
where is business central administration
Hello, hope you're all well. I have installed BC17 but for whatever reason, I cannot find my administration. which folder I can find the file to open it from?
-
Nav 2015 RTC .NET Framework problem
Hi everyone, I have installed Nav 2015 Version (8.00.41779) and also my administration panel create instances with the same version. Everything works fine, but when i try to edit/add data in any table i got error on the top: Cannot load an instance of the following .NET Framework object: assembly…
-
Dynamics NAV 2017 - Event Publishers not working
My company is converting From Dynamics NAV 2017 to the latest version of Business Central. I'm trying to prepare the old code for conversion, but the only info I can find about Event Publishers is for later versions. I've tried following an example for 2018, but it doesn't seem to work in 2017. Ideas where I can look?…
-
Can't scroll down in Section Designer Nav 5.0 sp1
Hey experts, I've got a problem with report Section Designer. I need to do a large Report and when I added few new Sections, I can't scroll down to sections below because scroll won't go any lower. (There are few sections below the last visible section, screenshot below) Does anyone know how to fix this problem? Regards
-
Page Web Service Basic Authentication
HI, I have created a new table & page of same table. Then i have published that page as a webservice. It is working fine in my local machine's google chrome. I have set "Use NTLM authentication" = Yes in the service. How can the web service be published with Basic authentication, i have tried below: 1. I have encoded the…
-
Working with certificate on BC15 (Cloud)
Hi all, Did anyone work with certificates on BC15, cloud? We used X509Certificate2, X509ContentType and X509KeyStorageFlags dotnet's in previous version for working with certificates. But now I'm not able to use dotnet's anymore, and also as I saw I can't map these dotnet's with new codeunit DotNet_X509KeyStorageFlags,…
-
Report does not display records that are received at pageloop
Hi All, I am designing report in RDLC where I need to display each record that is found as new page in report layout. Issue: There is always same record (first found record) displayed in the report layout, but code gets correct number of employees that are set in the filter. This is just an example: - DataItem CopyLoop ->…
-
Job posting setup in Job Task
Dear Expert, currently we are testing JOB Costing functionality and we found that job wip posting are not working based on the setup that we defined in job posting group. some friends recommend me to find similar case in this website. however i havent found any. so i decided to post this question here. 1. create two new…
-
Transfer Bin from Item Tracking
Hi, I've added some code to fill the bin code of the item tracking according to the serial number entered. Now I need to transfer this bin to the transfer order. Can someone point me in the right direction? Thanks!
-
Cannot create a new Business Central cloud Sandbox environment from Production
Hi experts, In Business Central Administration Center, I try to create a new Sandbox environment. I want it to be a copy of Production. When I do so, it is shown in the list of environments (with status "Preparing" if I remember it right). After 5-10 minutes, the environment is gone again. No warnings. No error messages.…
-
How to stop Pop up when creating Assembly Order from Code
Hi All I have created a page action to create an Assembly order from job lines but when I VALIDATE quantity on Assembly order it comes up with the famous RUN MODEL error and pop (when components are not enough ). Tried COMMIT before but didn't work codeunit 10010 MY_AssemblyOrderCreateFromJob { trigger OnRun() begin end;…
-
Continia Document Capture Implementation for Partners
When implementing Continia Document Capture, you as a Partner can occasionally use some extra expertise. Simplanova is an official Continia DC implementation partner – ready to contribute to timely deliveries in your organization. Simplanova’s Continia Document Capture implementation service is designed for Dynamics…
-
How to revise the Straight Line % of a Fixed Asset in Dynamics NAV 2016
Hi All, Can anyone suggest how to revise the Fixed Asset depreciation Straight Line % without modifying the existing %? For example: My asset has a straight line % of 5 till 1st June 2021 and it got revised to 4.7 and the user needs both the records. Thanks in advance, Srinivas Maddula.
-
Change company on web client -Navision 2015
Hi, Can anybody tell me how to proceed with Change company in Navision 2015 on the web client? I can't see anywhere the option for this. Thank you
-
Auto Import File from Azure Storage to Cloud BC
Hi All, does anyone ever customize auto import file from Azure Storage to cloud BC? is that possible? Please advise and share. Thanks before
-
Get Payroll Entry From Sage ERP Payroll
Hello Am working know on BC 140 and ama searche to how can upload automaticattly or receive frome Sage Entry Ledger Payroll to post it on Business central and aiuthore choice is how can send (Employee scores) from Business central from a specific Table / Page with total based on heading and range date to table on sage…
-
Test a webservice [SOVLED]
Hi Can someone tell me how I can test a NAV webservice? Thanks in advance.
-
Option Field Values
Hi Folks - A small help needed here. I have a option field called Contractor type which has option values ,Supplier,Retailer,Warehouse,In house. When I add this field to a page I just want to show the option values of ,Supplier,Warehouse but not retailer. I tried removing the option values on the page and just put…
-
Screen recording
Hi all, which app do you use to record your PC screen? I’m looking for one that is easy and quick to use. Thanks a lot.
-
Changes to customer card
Hi all, I have changed some field names in the dev environment on a customer card, when I now run this I can see the changes that have made, but no other users can see these!!!!!!! Am I missing something
-
Why OnAfterValidate does not work on certain table fields
Hi Guys I have created a custom field on purchase line table - say U_TaxAmout . Now I want to calculate and update this field when Amount field is validated. However if I modify "Amount" field and use OnAfterValidate trigger, my user field does not get populated. But if I trigger on "Direct Unit Cost" or Quantity it works.…
-
run a report with multiple outputs
Hi, I need to write a report that will give me multiple reports form it. Could anyone point me to one thas has already been made if such or an idea how to do it. Obvs googled but coudlnt find anyhitng...
-
Business Central 14 On Prem Download Symbols
Hello experts, Client is using BC14 Platform CU 16 Application CU11 On premise version. We have two Services on two different servers. One server has Window Authentication and other server has AAD authentication. Now I want to download symbols for TEST Database in Visual studio code. We have setup new service on new server…
-
Send email using Email Accounts instead of SMTP ?
Hi All, any idea how to send email using personal email account? instead of email setup in SMTP Setup. by the way i am using Cloud BC Thanks.
-
Auto Close Idle v4.3.0
Auto Close Idle v3.2.0 Auto Close Idle helps you monitor and safely close unattended Navision clients after a certain idle time, or at any time by a click of a button; remotely. http://www.mibuso.com/dlinfo.asp?FileID=268 Discuss this download here.
-
Translate index plan advice into proper Dynamics NAV key
Hi there, I've been suggested by some monitoring tool on SQL Server to add a new key to one of my Dynamics NAV-tables. The suggestion is as followes: Missing index (impact 18.3375): CREATE NONCLUSTERED INDEX [<Name of Missing Index,sysname,>] ON [TESTDATABASE].[dbo].[Schedule] ([Employee Role],[Duty Option]) INCLUDE…