-
Web client shows 2 reports when only one was modified
I modified the Inventory Valuation report using the development environment and now on the web client it shows 2 Inventory Valuation reports. One of them work as expected and the other just goes to an error page. I did previously copy the original to a new report I called Inventory Valuation2 but after I was done with the…
-
Deleted report still shows in NAV and Web Client
I recently created a 2nd report named Inventory Val2 to help practice for modifying an existing report in the NAV Development Environment. After all changes were done and copied to the original report(Inventory Valuation) I deleted the 2nd report. But now when I search in the NAV client or Web Client I see 2 Inventory…
-
Slow performance with SAVEASPDF and custom report layouts
Hi, Have any of you experienced slow performance when using SAVEASPDF on a report with custom layout in NAV 2018 (CU3)? Our experience is that once you select a custom layout for a report the time it takes to run SAVEASPDF increases from a few seconds to between 15-30 seconds - for the same built-in layout! Try the…
-
SMTP Mail Setup not working after Multi Factor Authentication
Hi All, I am not able to configure SMTP Mail Setup after the MFA implementation. We know earlier this was a simple step to configure SMTP with Office 365 Server Setting. In my knowledge after MFA, the password will be the AppPassword. I tried this but no luck. See the setup and error in below screen shot. Business Central…
-
Replace the warehouse shipment line while selecting the different record.
Hi all, I have created one new warehouse shipment. Here (Ribbon->Getsource Documents). I can able to select any record from the source document page(without considering the 'Destination no' field). If i try to insert another record, it has to delete/replace the first record with a new record in the warehouse shipment line.…
-
Get current value of page control and past it using GETRECORD
Hi All, I have multicompany database and I need to write the code to get (currently users' logged in compnay) record of table: "Job: and copy it to the same table of different company. I just can't get the GETRECORD working as it should. CopyJob is a record link to the Page="Copy Job" Company is a Page Control on the Copy…
-
can we create Credit Memo on Partial Prepayment Invoice
Hi im new to nav, Can we credit memo the prepayment invoices partially or for a particular invoice can we post credit memo by clicking it. Thanks in advance,
-
Question for Workflow Steps When Event
Hi Experts, May I know if the Order of When Event matters when in terms of approval process? Thanks in advance for your answers!
-
The supplied field number 'xxxxx' cannot be found in the 'xxxx' table. <SOLVED>
Hi everyone, While trying to run page 89 Job List, I hit upon the following error message: The supplied field number '50025' cannot be found in the 'Job' table. I used to have field 50025 in my job table but I don't have it anymore and nothing references this field in 89 page. I exported in a text file and tried to find…
-
Printing external excel file with multiple sheets
Is it possible to print all sheets from external excel file?
-
Data Matrix 2D Barcode
Dynamics NAV 2013 I'm trying to get a Data Matrix label printed (have got 2D QR Codes printing using the Mexico version of Nav mentioned somewhere on this forum). There are recommendations to use DataMatrix.net.dll as mentioned on https://forum.mibuso.com/discussion/comment/329727#Comment_329727. Once downloaded I've…
-
While Run the Customized report getting this error frequently,can u please any one suggest on this
Type: Microsoft.Dynamics.Nav.Client.NavClientClosingException Fatal: False ShowError: True Message: This operation cannot be completed. There is no active connection to the server. Close the application and start it again. StackTrace: at…
-
BC140 Can't print directly
Hey everyone, BC Version: Problem: On the RTC I can't print directly a report, when I press print and select the printer/xps/pdf or any other thing it just crashes my client. It works fine with the Webclient, but not with the RTC. If I do preview and then print on the preview it works OK. I've tried this in different…
-
NAVAppProfiler
I was checking the NAV App Profiler and I found this, https://archive.codeplex.com/?p=navappprofiler. I downloaded it but the dll is missing. I can't compile the page because it's returning error "Could not load type 'EtwPerformanceProfiler.EtwPerformanceProfiler.'EtwPerformanceProfiler, Version=1.0.0.0, Culture=neutral,…
-
Microsoft Dynamics.Nav.Client has stopped working error
Windows 10 device Navision 2013 Need assistance/feedback on how to clear this error. Only happening on one device. Regards Anola Stewart
-
Bank account Reconciliation
While doing bank account reconciliation, how to check with statement lines in nav 2013. there is no statement line showing in bank reconciliation, can any one please suggest me.
-
Is it possible to set printer preferences in report ?
I have a problem when printing labels on TLP 2844 printer. That printer is shared on lan and for some reason all computers have different preferences set. So when printing from NAV it doesnt work as I want. If i set preferences manually it works well. But its not saving. Also, theres one more program which uses that…
-
Are promoted actions not a thing in Business Central?
Are promoted actions not a thing in Business Central? Or rather, are they not shown in their own tab anymore, e.g. the "Home" tab. In NAV 2013 promoted actions on a role page where shown in their original group/tab, but also under a second group/tab, - the "Home" tab. In Business Central this doesn't seem to be the case.…
-
Can you link external MySQL tables to NAV 2018?
Hello everyone, I'm new to the concept of connecting and using external Tables in NAV. In this specific case our customer want to use an external MySQL database together with NAV 2018 CU5. The development is going to be "old school" in C/AL via the development client. NAV is supposed to read and write into these external…
-
Business Central Design Mode - can't add field to role centre
Hi All, I'm having an issue adding a field to a role centre in design mode (and personalisation) as below: - I have another question also, is there a way to turn off customization mode for customer so they can't use it ever? Regards & Thanks Roddy
-
BC apps - your service is not ready yet, please try again in a short while
Hi all, anyone ever got this error message? it only appear if i opened using bc apps. use web browser no prob
-
how to generate data to Data Matrix Code & PDF147?
Hi All, i want to print label as data matrix code and pdf147 are we able to do that in NAV? by the way i am using nav 2015 Thanks
-
Trated of extension dependencies in BC
Hi at all, I have the next scenerio: Extension 1 with version 1.0.0.0 Name "Extension 1" add a field in table customer Extension 2 with version 1.0.0.0 Name "Extension 2" add a field in page customer list Now, I need to modify the extension 1 adding one field more, but when I try to install newly from visual studio code, I…
-
Where is currency in words coming from?
I am trying to figure out where is POUNDS (Currency in words) coming from when I print a Posted Sales Invoice. It appears for some documents only and I can't figure out where is it coming from. I do not want it to be there since the Currency Code shows right after it and that is all that I want. The LCY Code on General…
-
Busines Central instalation problems
Hello I have a problem while installing Busines Central which i cant seem to solve. Can anybody help me please? The service 'Microsoft Dynamics 365 Business Central Server [BC140]' (MicrosoftDynamicsNavServer$BC140) failed to start. This can be caused by one of several issues. For example, the password for the account that…
-
NAV users errors showing on the middle tier Event Log
Hello. I'm wondering why the middle tier records the Error Messages occurring in NAV in the event log with full .net call stack. Is there a setting to disable this?
-
Ledgers entry impact in Inventory valuation report through Job Module
Hi Experts, I have raised a Job sales Invoice through Job Module, with consuming that particular item, and the system generates a Negative impact in Value entries. after running the adjustment the cost item entries, all value moves to GL entries. but in Inventory valuation report the amount and quantity is getting Doubled,…
-
What are the consequences of unpublishing an extension after it has been uninstalled?
Hello, i'm trying to upgrade the prodcution DB in business central 365 cloud Verion from: 14.5.35970.0 ==> 15.0.36560.0. at the same time i have an installed extension with this old version, which i want also to upgrade it. in order to upgrade the Extension from old verion to a new one, i need to uninstall it, then…
-
Where to find the Conditions of Automatic Matching in Bank Account Reconciliation
Hi Guys, Does anyone know here where do i find the Criteria of the conditions setted in the Bank Account Reconciliation Page? because when I look for it in the development environment it looks like this : and when I look for the report I only have this. about the whole question is that. I Was tasked to modify the Bank…
-
BC365:error when designing page (on-Premise install)
hi, I'm stuck on an BC365 Wave 2 (15) environment. My SQL is on Azure, my Administration Tier is on an Azure VM. BC works fine. The database is a Migrated one (NAV16 ->BC13 and now BC15) In the webclient, on any pages, in Designer mode, as soon as I drop a field, error is raising "something went wrong". The EventLog of the…