-
NAV 2009 R2 QR Code ERROR JIS X 0201 is supported.
-
how to charge a page from a codeunit
How can I change a field of one page from a codeunit? I have already a huge codeunit that writes the fields on a page but I can't understand how it can do it... thanks!
-
Warranty date
I have to print the warranty start date for a vehicle.. the table Vehicle Warranty is empty.. What can I do? Thanks!
-
LS Retails Scheduler Message Status
Dear Experts, When data is replicated from Server to POS and POS to Server using LS retail data director, Incoming & Outgoing messages are recorded in Navision. It used to work fine earlier. Due to some issues, we had to format server & reinstall everything. Please see attached image. But now messages are not being…
-
Can a field be changed into a caption?
Can a field be changed into a caption? Thanks!
-
How to add columns 'wrte-down'and 'Appreciation'on the Book 01 report for FA
I am supporting NAV 2009 (RTC & Classic), The problem I am facing is that on the Fixed Assets Report Book 01, I must add separate columns for Write-down and for Appreciation. Currently write-downs are combined with depreciation while Appreciation is combined with Additions. Anyone who has done it before or any ideas how I…
-
ADD A QR CODE In dynamics NAV 2009 R2
how to add a QR code Or Barecode on Document sales shipment with somes information (unite prise,name donore, adress,phone number ) a specifique information thank you
-
regroup several shipments of different orders in nav classic client 2009 R2
I want to regroup several shipments of different orders of the same client knowing that these order them of the invoices installments for this is what possible during the validation of the final invoice the system calculates the residue of all the orders is applied the Down payment on the final invoice?
-
There is no Value Entry within the filter.Filters: Item Ledg
Hi, Getting the following error when posting warehouse receipt of transfer order:- There is no Value Entry within the filter.Filters: Item Ledger Entry No.: No idea how to solve this one. Any help will be appreciated. Thank you, Manjusree
-
Field No. Change Impact
Hello! We need to change Field No. for some columns of SAles Invoice Line table. But, when we change Field No. , Forms start getting errors. Navision automatically changes the code that references the column, Any idea to avoid it? or any idea on how to change field no without such kind of problems??
-
Insufficient Inventory in Manufacturing
Hi, I inventory setup, I have "Prevent Negative Inventory" unchecked. All my item cards have "Prevent Negative Inventory" set to No. I can post a decrease inventory adjustment in Item Journal that takes inventory negative. However, when changing the status of a Released Production Order to Finished, I get messages saying…
-
TableData does not exist
Hullo! I hava a rather unusual error. Developing in a SQL database I'm creating, filling and doing operations in a new table. Well, it happens that when I open the same database and company with another user I get "TableData 50001 does not exist" :shock: :-s If I enter the database with the previous user the data still…
-
Chinese characters shown when sending SMTP mails to hotmail
We have a client who uses NAV 2009 R2, build 32012, with RTC We use codeunit 400 to send SMTP mail. The SMTP objects are standard NAV, and the Microsoft.Navision.Mail.dll is the standard version 1. Some addresses receive the mails without problem, but hotmail addresses see the subject in Chinese, while godaddy addresses…
-
Nav Web Services Authentication problems
I've made several web services (both SOAP and ODATA) in Nav, and when I call these from a Visual Studio program, they work well. BUT if I test them from a Web Service Test program, e.g. Boomerang (Google Chrome), SOA Client (Firefox), SoaUI, all tests returns Authentication error (401). I've tried to alter the…
-
HELP HELP HELP - F1 on RTC CLIENT 2016 don't works since 1 month. I have W10.
Since two weeks doing F1 on field of RTC NAV Client, it appears "Could not open HELP for the requested element". No eventvwr error, No DEBUG (the error is from RTC CLIENT). Form Internet explorer NAV HELP on port 49000 works fine. I didt find LOG o where to see the reason of this error. The error appears when i press F1 on…
-
Inconsistencies in the G/L entry table
Hello, After getting an error message about G/L entry inconsistencies when running the 'Close Income Statement' process for a fiscal year I looked around for a solution and found this post: http://forum.mibuso.com/discussion/22748/how-to-see-why-you-are-getting-consistency-error I followed the steps outlined and was left…
-
Filter flowfield
Hi folks, when I would like to filter a flowfield, do I use SETFILTER or SETRANGE? For example, I would like to get a value from the Field1 depending to the Filed2 which is the flowfiled.
-
HOW TO GENERATE A BAR CLASSIC CLIENT CODE
HELLO MY FRIENDS I WANT TO ATTRIBUTE A BAR CODE TO MY TICKET WEIGHING THE VALIDATION OF A GOOD DELIVERY HOW TO DO WHAT PRE REQUISITE DEVELOPMENT
-
Order tracking for emergency orders
Hi, I am using Nav version 5.0 and I have all my item cards set to 'Tracking only'. When I run a full regenerative plan, order tracking lines are created for all entries on the planning worksheet except those lines which are marked by the yellow caution icon as 'emergency orders'. For these lines, I get the message 'there…
-
Cash chnage Amount is not showing
Cash chnage Amount is not showing
-
barecode in NAV 2009 R2 classic client
HI it is my furst experience to implementing a barcode systeme , so i need the processus to do this and if it is coding in c/al pleas tel all you openion i don't have any idea
-
QR Codes DLL availability
Hi I have downloaded the files (from customersource) mentioned at http://blogs.msdn.com/b/nav/archive/2012/01/19/qr-codes-for-microsoft-dynamics-nav.aspx?PageIndex=1#comments and it does not include the file MXElectronicInvoice.msi. Instead it is called MicrosoftDynamicsNav2009SP1MXSignatureProvider.msi. When I install it…
-
XMLimport
Hi i would like to know how i can automate the order import from an xmlport. My wish is that a file (no specified name, should take any file name) and import it, than copy the file to an archive folder en delete the file from the import folder. The XMLport i got it to work but i dont know what to do with the codeUnit.…
-
Is NAV License works both with Native and SQL Version?
Dear all, One of my client is using native version of navision and he is using a 8 user license. Now he want to upgrade it to sql server option in navision . My question whether the same native navision license works well after the customer upgrade to sql. Thanks in advance. Regards sekar.
-
Convert Image object (byte [] or ToBase64String) to Navision?
Hello, what is the best way to import an image object (byte [] or ToBase64String) from C # to Navision. I'm using iteroperability.
-
barcode in report nav classic client 2009 R2
hi every budy can help i need to add a barcode to my documente when printed am working in nav 2009 R2 so in this version how to work it is ,and please can give me a detail for this solution thank you
-
NAV WMS Batch Picking
Hi ! I'm wondering if there's any way to setup NAV WMS granules to perform batch picking. This is a case/pallet picking warehouse, due to some constraints, we need to do the following 1. select group of orders 2. pick all the items needed for this group of orders into shipping dock 3. pickers build outbound shipping…
-
Credit Memos problem's ligne VAT in NAV2009 R2
hello My friends when I validate a have shopping basics on a return and when I view the document part of the printing the vat are displayed correctly after the document validation and print the original document the system validate the document without line VAT. thank
-
Inserting a record from Android into Navsion through SOAP Webservice
I am trying to insert a record into Navion through SOAP web Service, I am using Ksoap2 library for making SOAP calls Below is the TableClass Public class ESignOrderXSD implements KvmSerializable,Serializable { public String Key; public String Ship_To_PO_No; public String Customer_PO_No; public String Ship_to_Name; public…
-
NAS Setup
Hi We have created a NAS, and started the service in 2009 R2 However we are receiving an error msg within the Event Log; The IML_DEV database on the IMLSQL server cannot be opened by this version of Microsoft Dynamics NAV Classic. The database has already been converted by a newer program version. You must upgrade…