Network Problems

h0444ywx
h0444ywx Member Posts: 4
edited 2006-09-13 in NAV/Navision Classic Client
Hello,
I has a problem in the network.
With some Clients the following error message comes when starting of Navision. This message appears occasionally.
Navision version 370A the error message means: The network does not work perfectly. A package was damaged (check-sum errors).

The server has NT4 SP6 as operating system.
The Client concerned is at the same SWITCH as the server.
The Client has Windows 2000.

Comments

  • lzr
    lzr Member Posts: 264
    Make sure you run TCP and not TCPS on both server and client, I think this might be the problem.
    Navision developer
  • h0444ywx
    h0444ywx Member Posts: 4
    The Navision Version is 370A there is no TCPS Protokoll
  • Marije_Brummel
    Marije_Brummel Member, Moderators Design Patterns Posts: 4,262
    Have you checked the switch? Do they experience more network problems with other apps?
    Marije Brummel | Freelance Business Central Specialist
  • h0444ywx
    h0444ywx Member Posts: 4
    The Switch was checked and he is OK.

    There are no Problem with other application on this workstation.
  • Nobody
    Nobody Member Posts: 93
    Could be serveral things.

    1. Bug is the 3.70.A executables, you could try 3.70.B which is a little more stable. (4.0 and later executables are only supported on Win2k and later)

    2. The NIC on the Navision server could be going bad. You may just want to replace it as NIC's are dirt cheap

    3. Network issues that pop-up in Navision may not be noticable in other network apps such as Exchange because Navision is a HUGE user of network bandwidth. I seem to remember a "Network analyzer" tool put out by Navision you may want to search for that and run it.

    4. Could be a quirky DNS issue, you may want to trying putting a host file entry on each workstation for the Navision server.

Categories