Performance problems 2.65 10-15 sametime users

Hi Patrik,
Raid1 (mirroring) is ok and the machine should work well (Yes it's not the fastest one, but should be ok and I would add some RAM to the server).

First check that there is no other service running on the same machine, so that the RAM can be used as much as possible by Navision.
Try setting the parameters for the "CommitCache" (check the instructions on the product CD )

Another improvement can be done by using well designed keys. I speeded up a big reporting from running 4 hours into now running online (less than 5 seconds), by using the calcsum-statements instead of filtering with bad keys.

Hope this helps a bit

Patrik wrote:

I have a performance problem on my Navision server. I think it is related to my harware. I run the Native DB.

I run the server on a W2K IBM server with 4 disks running IBM:s raid 1E. 756 MB RAM and 2x1 Ghz processors.

I suspect that the bottleneck is the harddrives. How many disks would be optimal for my kind of system? (DB size 20 GB where 14 is allocated)

Is IBM raid 1E optimal?

I tried the microsoft support but they really was not interested in answering questions...

Appreciate any comments on this.

Patrik

One thing that is very important for Navision when running a large DB is that you split the DB up onto a number of files. E.g. 4 files of 5GB each. Place each file on it's own physical disk. I don't remember the performance increase no.'s when going from 1 file to 2 files and from 2 to 4 but they ARE significant (if and only if they are each placed on it's own physical hard-drive). You may be able to find a whitepaper on it somewhere.

Using 4 disks to hold ONE DB File of 20gb will be much slower.