DW NavBack Lite Beta v1.01B

2

Comments

  • Igor_Beeone
    Igor_Beeone Member Posts: 80
    Hello guys,
    agreed :)
    Br,
    Igor Beeone
    Certified Dynamics-NAV Contractor - Developer
  • kriki
    kriki Member, Moderator Posts: 9,121
    Savatage wrote:
    I agree with Kriki

    (hey that rhymes!) if you pronounce it "Creeky" :D
    I pronounce both "i" like the "i" in "kick".
    Regards,Alain Krikilion
    No PM,please use the forum. || May the <SOLVED>-attribute be in your title!

  • zhenhao
    zhenhao Member Posts: 3
    Hi, I have this error which says, File not found, c:\navibackup.fin.

    Any idea where can i change this setting? My server does not have c:\ drive, had been remapped into Q:\ way before i install DW NavBack
  • Igor_Beeone
    Igor_Beeone Member Posts: 80
    Hello,
    Could You please provide information on where DW NavBackup installation made? This will be fixed in next version using Application folder in Document And Settings.
    Waiting for Your response.
    Br,
    Igor Beeone
    Certified Dynamics-NAV Contractor - Developer
  • zhenhao
    zhenhao Member Posts: 3
    Hi, the application is installed on "Q:\Program Files\DW NavBackup Lite".
  • Igor_Beeone
    Igor_Beeone Member Posts: 80
    Hello,
    it will be fixed up in 3 days with the new beta release. Just keep patience :)
    Br,
    Igor Beeone
    Certified Dynamics-NAV Contractor - Developer
  • zhenhao
    zhenhao Member Posts: 3
    Ok, thanks alot :)
  • Leonxia
    Leonxia Member Posts: 2
    Hi,

    I have downloaded the lastest version of "DW NavBack Lite Beta v1.01B". It works fine. But It can't do backup while another user is using the DB. Basically the user in the DB blocks the backup script logging in. We are using Navision version 3.7 with native database. Do you have a solution to by-pass this issue?

    Thanks,
    Leon
  • Leonxia
    Leonxia Member Posts: 2
    Please ignore my last question. It was my mistake. It works fine now.

    Thanks,
    Leon
  • Savatage
    Savatage Member Posts: 7,142
    The Nav backup should work regardless.

    Here's how we use it
    http://savatage99.googlepages.com/MyBackup.pdf
    Harry Ruiz
    http://www.BiloBeauty.com
    http://www.autismspeaks.org
  • edv061
    edv061 Member Posts: 3
    Hello great coders,
    thanks for the great Program.
    --But i`ve a little problem with it.
    I installed it 2 times on 2 different Servers 2003.
    The versions are 4.0 SP3
    NavBackuplite Version 1.01B
    The first one runs fine :D, but the other one don`t :shock:. (Both with the same instructions)
    The backup is OK/zipping is OK/deleting of the file is Ok- but the DB is locked after the backup --like mentioned in the older beta-releases.
    If i start the navbackuplite manually -->after the scheduled backup<-- and break it manually for example if the login field is coming--it`s OK--and i`m able to log in
    any hints or solutions?
    thanks in advance!
  • edv061
    edv061 Member Posts: 3
    :oops: oops--i will change it to Native Server--I`ll give it a try in the evening--I`ll coming back with info :oops:
  • edv061
    edv061 Member Posts: 3
    edv061 wrote:
    :oops: oops--i will change it to Native Server--I`ll give it a try in the evening--I`ll coming back with info :oops:

    Yes it`s working now!!!
    Happy Christmas and a happy new year

    :D
  • afarr
    afarr Member Posts: 287
    I downloaded and installed DW Backup, and tried to use it with a Nav 3.70 SQL database; however, when I press the Test Script button, it opens the database and then closes some 30 seconds later without having done anything.

    When I contacted the developer, I was told that the beta version is no longer supported (fair enough, considering that it was free), but there is a commercial version available from navierra.com. When I checked, its price was 320 EUR.
    Alastair Farrugia
  • Navierra
    Navierra Member Posts: 2
    Sorry for non-supporting that old version. Sources for this NavBackup Lite were missed, so we've done commercial fully rewritten software for this purpose with many new features.
    Also, I've forgot to mention that You might get discount of 25% as Mibuso or Dynamicsuser member - You need just write us.
    Br,
    Igor
    --
    Br,
    Igor Beeone
    Navierra - NAV Solutions
    www.navierra.com
  • Savatage
    Savatage Member Posts: 7,142
    afarr wrote:
    I downloaded and installed DW Backup, and tried to use it with a Nav 3.70 SQL database; however, when I press the Test Script button, it opens the database and then closes some 30 seconds later without having done anything.

    When I contacted the developer, I was told that the beta version is no longer supported (fair enough, considering that it was free), but there is a commercial version available from navierra.com. When I checked, its price was 320 EUR.

    I had similar problems (see page 2 of this topic) It was fixed an now run's smoothly.
    Harry Ruiz
    http://www.BiloBeauty.com
    http://www.autismspeaks.org
  • a.natarajan
    a.natarajan Member Posts: 0
    I am unable to download the DW NavBACK Lite Beta . Can anyone please help me !
  • Savatage
    Savatage Member Posts: 7,142
    a.natarajan wrote:
    I am unable to download the DW NavBACK Lite Beta . Can anyone please help me !

    http://www.mibuso.com/dl.asp?FileID=879&Type=file
    Harry Ruiz
    http://www.BiloBeauty.com
    http://www.autismspeaks.org
  • meehi
    meehi Member Posts: 16
    Hi!
    I've tested your NavBackup Lite program but it doesn't seem to work for me. When I'm trying to run/test the script it crushes in the first step. I have set up everything but when it's trying to start navision then I recieve an error message like "The TCP/IP connection's 'host' is not answering (TCP/IP error ECONNREFUSED). If you have any idea please let me know.
  • Savatage
    Savatage Member Posts: 7,142
    have you tried entering the servers IP address instead of the name in the SERVER NAME field?
    http://savatage99.googlepages.com/MyBackup.pdf
    Harry Ruiz
    http://www.BiloBeauty.com
    http://www.autismspeaks.org
  • meehi
    meehi Member Posts: 16
    Savatage wrote:
    have you tried entering the servers IP address instead of the name in the SERVER NAME field?
    http://savatage99.googlepages.com/MyBackup.pdf

    Not yet. But thanks for the tip. I can try it only tomorrow.

    Best regards,
    meehi
  • sonias
    sonias Member Posts: 2
    The problem I have is that I connect to the server because I NAV 2 spaces left behind by the name of the server. This is a bug?
  • sonias
    sonias Member Posts: 2
    Any idea??
  • Savatage
    Savatage Member Posts: 7,142
    I NAV 2??

    Can you explain better what's happening?
    Harry Ruiz
    http://www.BiloBeauty.com
    http://www.autismspeaks.org
  • sonias
    sonias Member Posts: 2
    when I put the server name in the NavBack is correct, but then when you open the client NAV makes me two spaces behind and are not connecting.
    For example:

    NavBack -> Server: SRVNAV5
    Cliente_NAV5 -> SRVNAV5__
  • Savatage
    Savatage Member Posts: 7,142
    In the general tab - where the server name goes?
    or
    the extended tab - where you select the company?

    I'm not sure I understand what's not connecting.

    Have you tried entering the servers IP instead of the name?
    here's how we do it
    http://savatage99.googlepages.com/MyBackup.pdf

    anything further that that you can contact the developer.
    Igor.Beeone@gmail.com
    Harry Ruiz
    http://www.BiloBeauty.com
    http://www.autismspeaks.org
  • sonias
    sonias Member Posts: 2
    I put the server name in general tab-Navision Server - Server Name. Whether you put the name as the IP let me two spaces.
  • Savatage
    Savatage Member Posts: 7,142
    I would contact the developer at the email address above. perhaps he can explain about the spaces you are getting.

    are you typing it in or copy & pasting it from somewhere? perhaps you're getting "special characters?"
    Harry Ruiz
    http://www.BiloBeauty.com
    http://www.autismspeaks.org
  • sonias
    sonias Member Posts: 2
    I just SRVNAV
  • teckpoh
    teckpoh Member Posts: 271
    Hi experts,

    Once i run the 'test script'. Navision client application open automatically and login window prompted ask for userid & password. Where can i predefine the nav userid & password instead of manually key in at nav client?(coz i wish everything is automated) jz wonder wher to put those parameter..any idea?? THank in adv...

Categories