Print Label wrong rotate

julkifli33

Hi All
I have a problem with printing

I want to print label with 10.5 cm x 2.8 cm

This is my preview, looks ok


After print, then become


my design in RDLC


Printer setting



If i print usual (A4 or letter size) form like Sales Order/Invoice no issue
anyone can help?
Thanks

julkifli33

Hi Kishorm,
thanks for the advise

I have solved this issue by change the printer setting
label measurement is 106 x 28
but printer setting i set as 28 x 106
then solve the problem

thanks all for the advise

AlexDen

Hi.
Make height of page more than width in page setup of report.
11 cm, for example.

julkifli33

Hi Alex
Thanks for your advise
I tried it... I tested using A4 size
It will printed nicely

But the problem is i need it to be printed in label form
If i want to print 1 label it will waste another 8-9 labels

Herre i attached one of the sample
I printed 4 labels, wasted 5 blank labels

bjorn_pavlak

Hi

Often is not not enough to specify to size of the label. It is important to specify the WritingMode. The WritingMode can be Vertical or Horizontal.

julkifli33

Hi Bjorn,
i tried your advise
still error

Kishorm

Try running the report without showing the RequestPage, this should then pick up the Portrait setting from your printer properties. There are some weird rules about where it picks up the defaults from depending on whether the page is a standard or custom size and whether or not you show the RequestPage.

BTW - this is caused by the RDLC report, because the label is wider than it is in height it interprets this as landscape mode which is why it then prints sideways. It’s a horrible quirk!

julkifli33

Hi Kishorm,
thanks for the advise

I have solved this issue by change the printer setting
label measurement is 106 x 28
but printer setting i set as 28 x 106
then solve the problem

thanks all for the advise