Options

i cant run the sever

shafeaashafeaa Member Posts: 54
hi

i am trying to to connect client to server

but when i try to run the server this error appear


see the pic in the link

http://www.scgate.com/servererror.gif


how can i run the client using the network ??????? ](*,) ](*,) ](*,)

Comments

  • Options
    kinekine Member Posts: 12,562
    Under which user you are running the server? Have the user access to the database file? Is it the domain user or only local user?
    Kamil Sacek
    MVP - Dynamics NAV
    My BLOG
    NAVERTICA a.s.
  • Options
    shafeaashafeaa Member Posts: 54

    Under which user you are running the server? Have the user access to the database file? Is it the domain user or only local user?

    i dont understand what user u r talking about

    all what i have dane

    1.install navision database server on the server
    2.install client on the server
    3. go to the database server folder and run the server.exe

    and the black screen came in this way

    http://www.scgate.com/servererror.gif

    with this msg


    the program is unable to connect to the server's process.

    this is because the server is runing as a service using a system account.
    please run the client using the network insted.

    this is because the server is runing as a service using a system account.

    what is that suppose th mean
    please run the client using the network insted.

    how can i do this

    where did i go wrong
  • Options
    kinekine Member Posts: 12,562
    You did not configure the server... please, read the documentation for how to set it up (through mmc console snap-in or command prompt)
    Kamil Sacek
    MVP - Dynamics NAV
    My BLOG
    NAVERTICA a.s.
  • Options
    shafeaashafeaa Member Posts: 54

    You did not configure the server... please, read the documentation for how to set it up (through mmc console snap-in or command prompt)

    which documentation did u mean

    if u r talk about the "installaton and system management:navision database server"

    i read this one and i write this statment in the command prompt
    server servername=navision-server,nettype=tcp,database=d:\fdb\database.fdb
    

    but nothing change plz if there another doc told my where can i find it

    thank u kine
  • Options
    kinekine Member Posts: 12,562
    is navision-server name of your PC where you are running this server?

    (yes, this is the doc I mean...)
    Kamil Sacek
    MVP - Dynamics NAV
    My BLOG
    NAVERTICA a.s.
  • Options
    shafeaashafeaa Member Posts: 54
    is navision-server name of your PC where you are running this server?

    yes
  • Options
    shafeaashafeaa Member Posts: 54
    where did i go wrong
    ](*,) ](*,) ](*,) ](*,) ](*,)
  • Options
    kinekine Member Posts: 12,562
    Some small recap: you started server without problems, and after connecting with client, this error is showen?

    Or this error is after starting the server?

    The client is on the same machine as Server?

    Which OS you are using?

    Is this PC in network?

    Can be silly questions, but I have no clear picture of your situation... #-o
    Kamil Sacek
    MVP - Dynamics NAV
    My BLOG
    NAVERTICA a.s.
  • Options
    shafeaashafeaa Member Posts: 54
    Some small recap: you started server without problems, and after connecting with client, this error is showen?

    no this error is showen after i started server
    Or this error is after starting the server?
    yes thats right this is my case
    The client is on the same machine as Server?
    yes the client is on the same machine as Server ?
    Which OS you are using?

    windows 2000 with sp 4
    Is this PC in network?

    yes this pc in network


    Can be silly questions, but I have no clear picture of your situation...

    my friend dont say that i indebted for u
    u r trying to help me thank u :wink:

    i have suggestion can u explain to me the procedure in steps
    if we dont reach the solution of this case :roll: plz
  • Options
    kinekine Member Posts: 12,562
    Look into Services for service Navision Database Server xxxx... and stop it... :-) may be that this is your problem... some server is running and the new server you want to start was trying to connect to the port, but the port is in use...
    Kamil Sacek
    MVP - Dynamics NAV
    My BLOG
    NAVERTICA a.s.
  • Options
    shafeaashafeaa Member Posts: 54
    do u mean Services in this path
    WINNT\system32\drivers\etc

    if yes i did not find any Service called Navision Database Server

    this this my Services file

    # Copyright (c) 1993-1999 Microsoft Corp.
    #
    # This file contains port numbers for well-known services defined by IANA
    #
    # Format:
    #
    # <service name> <port number>/<protocol> [aliases...] [#<comment>]
    #

    echo 7/tcp
    echo 7/udp
    discard 9/tcp sink null
    discard 9/udp sink null
    systat 11/tcp users #Active users
    systat 11/tcp users #Active users
    daytime 13/tcp
    daytime 13/udp
    qotd 17/tcp quote #Quote of the day
    qotd 17/udp quote #Quote of the day
    chargen 19/tcp ttytst source #Character generator
    chargen 19/udp ttytst source #Character generator
    ftp-data 20/tcp #FTP, data
    ftp 21/tcp #FTP. control
    telnet 23/tcp
    smtp 25/tcp mail #Simple Mail Transfer Protocol
    time 37/tcp timserver
    time 37/udp timserver
    rlp 39/udp resource #Resource Location Protocol
    nameserver 42/tcp name #Host Name Server
    nameserver 42/udp name #Host Name Server
    nicname 43/tcp whois
    domain 53/tcp #Domain Name Server
    domain 53/udp #Domain Name Server
    bootps 67/udp dhcps #Bootstrap Protocol Server
    bootpc 68/udp dhcpc #Bootstrap Protocol Client
    tftp 69/udp #Trivial File Transfer
    gopher 70/tcp
    finger 79/tcp
    http 80/tcp www www-http #World Wide Web
    kerberos 88/tcp krb5 kerberos-sec #Kerberos
    kerberos 88/udp krb5 kerberos-sec #Kerberos
    hostname 101/tcp hostnames #NIC Host Name Server
    iso-tsap 102/tcp #ISO-TSAP Class 0
    rtelnet 107/tcp #Remote Telnet Service
    pop2 109/tcp postoffice #Post Office Protocol - Version 2
    pop3 110/tcp #Post Office Protocol - Version 3
    sunrpc 111/tcp rpcbind portmap #SUN Remote Procedure Call
    sunrpc 111/udp rpcbind portmap #SUN Remote Procedure Call
    auth 113/tcp ident tap #Identification Protocol
    uucp-path 117/tcp
    nntp 119/tcp usenet #Network News Transfer Protocol
    ntp 123/udp #Network Time Protocol
    epmap 135/tcp loc-srv #DCE endpoint resolution
    epmap 135/udp loc-srv #DCE endpoint resolution
    netbios-ns 137/tcp nbname #NETBIOS Name Service
    netbios-ns 137/udp nbname #NETBIOS Name Service
    netbios-dgm 138/udp nbdatagram #NETBIOS Datagram Service
    netbios-ssn 139/tcp nbsession #NETBIOS Session Service
    imap 143/tcp imap4 #Internet Message Access Protocol
    pcmail-srv 158/tcp #PCMail Server
    snmp 161/udp #SNMP
    snmptrap 162/udp snmp-trap #SNMP trap
    print-srv 170/tcp #Network PostScript
    bgp 179/tcp #Border Gateway Protocol
    irc 194/tcp #Internet Relay Chat Protocol
    ipx 213/udp #IPX over IP
    ldap 389/tcp #Lightweight Directory Access Protocol
    https 443/tcp MCom
    https 443/udp MCom
    microsoft-ds 445/tcp
    microsoft-ds 445/udp
    kpasswd 464/tcp # Kerberos (v5)
    kpasswd 464/udp # Kerberos (v5)
    isakmp 500/udp ike #Internet Key Exchange
    exec 512/tcp #Remote Process Execution
    biff 512/udp comsat
    login 513/tcp #Remote Login
    who 513/udp whod
    cmd 514/tcp shell
    syslog 514/udp
    printer 515/tcp spooler
    talk 517/udp
    ntalk 518/udp
    efs 520/tcp #Extended File Name Server
    router 520/udp route routed
    timed 525/udp timeserver
    tempo 526/tcp newdate
    courier 530/tcp rpc
    conference 531/tcp chat
    netnews 532/tcp readnews
    netwall 533/udp #For emergency broadcasts
    uucp 540/tcp uucpd
    klogin 543/tcp #Kerberos login
    kshell 544/tcp krcmd #Kerberos remote shell
    new-rwho 550/udp new-who
    remotefs 556/tcp rfs rfs_server
    rmonitor 560/udp rmonitord
    monitor 561/udp
    ldaps 636/tcp sldap #LDAP over TLS/SSL
    doom 666/tcp #Doom Id Software
    doom 666/udp #Doom Id Software
    kerberos-adm 749/tcp #Kerberos administration
    kerberos-adm 749/udp #Kerberos administration
    kerberos-iv 750/udp #Kerberos version IV
    kpop 1109/tcp #Kerberos POP
    phone 1167/udp #Conference calling
    ms-sql-s 1433/tcp #Microsoft-SQL-Server
    ms-sql-s 1433/udp #Microsoft-SQL-Server
    ms-sql-m 1434/tcp #Microsoft-SQL-Monitor
    ms-sql-m 1434/udp #Microsoft-SQL-Monitor
    wins 1512/tcp #Microsoft Windows Internet Name Service
    wins 1512/udp #Microsoft Windows Internet Name Service
    ingreslock 1524/tcp ingres
    l2tp 1701/udp #Layer Two Tunneling Protocol
    pptp 1723/tcp #Point-to-point tunnelling protocol
    radius 1812/udp #RADIUS authentication protocol
    radacct 1813/udp #RADIUS accounting protocol
    nfsd 2049/udp nfs #NFS server
    knetd 2053/tcp #Kerberos de-multiplexor
    man 9535/tcp #Remote Man Server
  • Options
    kinekine Member Posts: 12,562
    No, I mean Services in Control panel - Admin tools - Services...
    Kamil Sacek
    MVP - Dynamics NAV
    My BLOG
    NAVERTICA a.s.
  • Options
    shafeaashafeaa Member Posts: 54
    i search in the Services in Control panel but i did not found
    Service called Navision Database Server

    ](*,) ](*,) ](*,) ](*,)

    i am going crazy :cry:
  • Options
    admoretutsieadmoretutsie Member Posts: 79
    8-[ Sounds like you are in a real mess. l am a newbie as well, but l think this might help. You are using onr machine for the server and client. In that case, you need to install the STANDALONE application. You are not keen on reading the manual, that is evedent in your level of desperation, so l suggest you try the following.

    1) Install the COMPLETE client on your machine.
    2) Copy your .flf to the installation folder ( c:\prog... files\micro..bus..sol..\... ) .flf is you license file hey!
    3) Make sure you have the database database.fdb, or what ever you have called it to the same installation directory, ot whereever you want.
    4) Start the client application, and choose the database location fro step 3 above.

    Hope you will be up and running, if this does not help you, you need to take one great deep breath, go into your CD, Doc folder, and read, l mean read THUSLY..



    Good day 8-[
    $cside -MBS
    >install Navision::4.0 SP1
    >q
    $
    oOo
  • Options
    shafeaashafeaa Member Posts: 54

    2) Copy your .flf to the installation folder ( c:\prog... files\micro..bus..sol..\... ) .flf is you license file hey!

    which license did u mean there is one flf file in the client foldr
    CRONUS.FLF

    just this one
  • Options
    fbfb Member Posts: 246
    If you can't find the service listed in Control Panel, Services (did you look for a service named 'navision-server'?), then run Task Manager and look for 'SERVER.EXE' in the process list. If you find it, then it must be running as a service.

    Note that the installation procedure for the Navision Server Service automatically starts the service -- you must stop the service before you can run '>server.exe' at the command line.
  • Options
    SavatageSavatage Member Posts: 7,142
    i guess if all else fails you can uninstall everything & reinstall it again.

    maybe this can help:
    http://www.mibuso.com/dlinfo.asp?FileID=304
Sign In or Register to comment.