mibuso.com
Home› NAV Three Tier
Options

Is R2 delayed?

BubaBuba Member Posts: 24
edited 2010-12-22 in NAV Three Tier
When will Microsoft Dynamics NAV 2009 R2 W1 VM be available on PartnerSource?
We will publish the download links in the week of December 20th, 2010.
https://mbs.microsoft.com/Cms/Templates/document/General.aspx?NRMODE=Published&NRNODEGUID=%7b0A99BDB7-ADC6-44D5-B1EA-6392B7E89B65%7d&NRORIGINALURL=%2fpartnersource%2fdeployment%2fmethodology%2fvpc%2fnav2009r2%2ehtm&NRCACHEHINT=Guest
«1

Comments

  • Options
    Luc_VanDyckLuc_VanDyck Member, Moderator, Administrator Posts: 3,633
    They are talking about a VM evironment (Virtual Machine) with some software pre-installed. I presume the regular downloads (one file per country version) will be available on PartnerSource from 15 Dec, as planned.
    No support using PM or e-mail - Please use this forum. BC TechDays 2024: 13 & 14 June 2024, Antwerp (Belgium)
  • Options
    BubaBuba Member Posts: 24
    Ok, think I was told the virtual image should be released before the actual release.
    Anyway, hope it's released tomorrow then.
  • Options
    ssinglassingla Member Posts: 2,973
    Waiting for the release since morning. Seems they are going to release as per US time.
    CA Sandeep Singla
    http://ssdynamics.co.in
  • Options
    BeliasBelias Member Posts: 2,998
    released! but in the meantime, 81 thumbsdown appeared on the download page :)
    too much enthusiasm :mrgreen:
    -Mirko-
    "Never memorize what you can easily find in a book".....Or Mibuso
    My Blog
  • Options
    David_SingletonDavid_Singleton Member Posts: 5,479
    Belias wrote:
    released! but in the meantime, 81 thumbsdown appeared on the download page :)
    too much enthusiasm :mrgreen:


    Do you have a link. I can't find it.
    David Singleton
  • Options
    ssinglassingla Member Posts: 2,973
    David Singleton wrote:
    Belias wrote:
    released! but in the meantime, 81 thumbsdown appeared on the download page :)
    too much enthusiasm :mrgreen:


    Do you have a link. I can't find it.
    I too cannot find it. Neither in Launch Portal or in download section of partner source ](*,) :-k
    CA Sandeep Singla
    http://ssdynamics.co.in
  • Options
    BeliasBelias Member Posts: 2,998
    even if i don't want to slow my download, i owe you so much that i MUST share the link ;)
    https://mbs.microsoft.com/partnersource/support/selfsupport/productreleases/microsoftdynamicsnav2009r2.htm
    enjoy!
    -Mirko-
    "Never memorize what you can easily find in a book".....Or Mibuso
    My Blog
  • Options
    ssinglassingla Member Posts: 2,973
    Belias wrote:
    even if i don't want to slow my download, i owe you so much that i MUST share the link ;)
    https://mbs.microsoft.com/partnersource/support/selfsupport/productreleases/microsoftdynamicsnav2009r2.htm
    enjoy!

    Thanks a million Belias =D> =D>
    CA Sandeep Singla
    http://ssdynamics.co.in
  • Options
    David_SingletonDavid_Singleton Member Posts: 5,479
    Belias wrote:
    even if i don't want to slow my download, i owe you so much that i MUST share the link ;)
    https://mbs.microsoft.com/partnersource/support/selfsupport/productreleases/microsoftdynamicsnav2009r2.htm
    enjoy!

    Thank you.

    And I think Microsoft have enough bandwidth. Mine is telling me total download time 9 minutes. :shock:
    David Singleton
  • Options
    aavioaavio Member Posts: 143
    \:D/ NAV baby finally arrived =D> :D
    aav!o
  • Options
    BeliasBelias Member Posts: 2,998
    David Singleton wrote:
    Belias wrote:
    even if i don't want to slow my download, i owe you so much that i MUST share the link ;)
    https://mbs.microsoft.com/partnersource/support/selfsupport/productreleases/microsoftdynamicsnav2009r2.htm
    enjoy!

    Thank you.

    And I think Microsoft have enough bandwidth. Mine is telling me total download time 9 minutes. :shock:
    :shock: impressive...mine is 12 min but i'm already at 81%...i guess that my company is restricting the download speed :(
    -Mirko-
    "Never memorize what you can easily find in a book".....Or Mibuso
    My Blog
  • Options
    kapamaroukapamarou Member Posts: 1,152
    Receiving...

    :D
  • Options
    aavioaavio Member Posts: 143
    was checking no. mibuso online users... 3 min ago 60.. now at 72

    R2 enthusiasm rising... :D . can it beat 180 set on Tue Feb 09, 2010 6:54 pm :?:
    aav!o
  • Options
    BeliasBelias Member Posts: 2,998
    kapamarou wrote:
    Receiving...

    :D
    one tenth for me...damn sys administrators! :mrgreen:
    -Mirko-
    "Never memorize what you can easily find in a book".....Or Mibuso
    My Blog
  • Options
    ssinglassingla Member Posts: 2,973
    Belias wrote:
    kapamarou wrote:
    Receiving...

    :D
    one tenth for me...damn sys administrators! :mrgreen:
    Its even worse here.
    CA Sandeep Singla
    http://ssdynamics.co.in
  • Options
    geronimogeronimo Member Posts: 90
    getting it now as well :)
    thanks for the link
  • Options
    fbedollafbedolla Member Posts: 4
    Just installed

    and uninstalled quickly

    R2 cant be installed with 2009 SP1 at the same pc

    ok uninstall SP1
    install R2
    works ok
    try to install SP1 again
    system says NO

    because I have customers with SP1 I uninstall R2 until I have another computer

    I dont like this situation
    I usually have on my laptop NAV 4, 5 and 6 (I need it this way)

    Best Regards
  • Options
    Ian_Piddington10199Ian_Piddington10199 Member Posts: 167
    Got it,

    Uninstalled SP1 and Installed it.

    Can't find the CRM connector yet but the rest is looking good.

    Going to put SP1 back, although I guess this will have to be done manually in the same way as when SP1 came out.

    Is deffinatly time to have a customer specific Service Tier VM on the servers at work.
    Regards

    Ian
  • Options
    deV.chdeV.ch Member Posts: 543
    Can't you just install the msi files for classic anc rtc manually and have the advantage of not losing sp1? I did it always this way with sp1.
    My Blog
  • Options
    BeliasBelias Member Posts: 2,998
    Ian_Piddington wrote:
    Got it,

    Uninstalled SP1 and Installed it.

    Can't find the CRM connector yet but the rest is looking good.

    Going to put SP1 back, although I guess this will have to be done manually in the same way as when SP1 came out.

    Is deffinatly time to have a customer specific Service Tier VM on the servers at work.
    crm connector is downloadable in a separate section: check the download links in the page of nav r2 (it says that it will be available on 17th dec, just wait one more day
    -Mirko-
    "Never memorize what you can easily find in a book".....Or Mibuso
    My Blog
  • Options
    BeliasBelias Member Posts: 2,998
    undocumented improvement: dropdown option fields in classic client have finally a black border :!:
    -Mirko-
    "Never memorize what you can easily find in a book".....Or Mibuso
    My Blog
  • Options
    David_SingletonDavid_Singleton Member Posts: 5,479
    Belias wrote:
    undocumented improvement: dropdown option fields in classic client have finally a black border :!:

    Didn't they always? Or am I missing something?
    David Singleton
  • Options
    BeliasBelias Member Posts: 2,998
    here you are! 8)
    -Mirko-
    "Never memorize what you can easily find in a book".....Or Mibuso
    My Blog
  • Options
    vijay_gvijay_g Member Posts: 884
    Grates......!!!!! =D> =D> =D>
    i have downloaded it with in 1 hour.
  • Options
    deV.chdeV.ch Member Posts: 543
    i just noticed in the documentation: http://msdn.microsoft.com/en-us/library/gg502518.aspx

    no events with dotnet types :( [-X
    My Blog
  • Options
    BeliasBelias Member Posts: 2,998
    page action shortcut changed from alt+v,a to alt+v,o :(
    why?now i need 2 hands to do it...or an extra long middle finger... :-k
    on the bright side, you can access it from any line instead of the first blank line only
    edit: i found why...because the c/al locals have the same shortcut...but it that context the c/al locals is useless!ok, it's just mine caprice, but i was too addicted to this shortcut...
    -Mirko-
    "Never memorize what you can easily find in a book".....Or Mibuso
    My Blog
  • Options
    deV.chdeV.ch Member Posts: 543
    because now you can access actions from everywhere in the page, not only on a new row.

    in SP1: ctrl+v a is normaly used for the locals, only on a new row its for the actions.

    now the actions needed their own shurtcut as you can access them from all over the page.

    edit: oh you edited :mrgreen: ...
    My Blog
  • Options
    Alex_ChowAlex_Chow Member Posts: 5,063
    Haven't gotten a chance to test this myself. Does anyone if if objects exported out of R2 can be imported in SP1 and vice versa?

    Thinking of doing away with SP1 completely.
    Confessions of a Dynamics NAV Consultant = my blog
    AP Commerce, Inc. = where I work

    Getting Started with Dynamics NAV 2013 Application Development = my book
    Implementing Microsoft Dynamics NAV - 3rd Edition = my 2nd book
  • Options
    Alex_ChowAlex_Chow Member Posts: 5,063
    The objects is import/exportable between versions.

    However, it's a pain to have to upgrade the service tier... Looks like we can't completely rid of SP1 yet.
    Confessions of a Dynamics NAV Consultant = my blog
    AP Commerce, Inc. = where I work

    Getting Started with Dynamics NAV 2013 Application Development = my book
    Implementing Microsoft Dynamics NAV - 3rd Edition = my 2nd book
  • Options
    BubaBuba Member Posts: 24
    I've tested the WAN connection with certificates.
    I'm actually impressed.
Sign In or Register to comment.