I assume you mean an Item assembly rather than a production BOM.
In short there is no scrap % but if your % is fixed you can compensate on the assembly build qty.
e.g. Item A being the finished aseembled item requires 10 of item b and 20 of item C with a scrap % of 10%
Then just add 11 and 22 to the assembly, your only other alternative is to develop around it.
A futher work around option is to transfer your issue quanties into a wip location and let the BOM assembly decard from there then you will need to do a periodic write off from this location for scrap.
Comments
pls help me
raamalakshmi
In short there is no scrap % but if your % is fixed you can compensate on the assembly build qty.
e.g. Item A being the finished aseembled item requires 10 of item b and 20 of item C with a scrap % of 10%
Then just add 11 and 22 to the assembly, your only other alternative is to develop around it.
A futher work around option is to transfer your issue quanties into a wip location and let the BOM assembly decard from there then you will need to do a periodic write off from this location for scrap.
Hope it helps
Jer.
Ger
Simply Dynamics Ltd
skype: gf.simplydynamics
Web: www.simplydynamics.ie