Pre printed reports alignment is going out in Navision 2016

Siva_123 · 2016-11-15

Hi Everyone,

I am facing a preprinted issue, they are having 2 warehouses, each warehouse is having 20 (approx.) dot matrix printers, recently they upgraded from Navision 4.0 to 2016.

In Navision 4.0 :-
we are printing 50000 report from 20 different printers in 2 ways
1. save as PDF & print working fine.
2. Direct print is working fine.

In Navision 2016:-
we are printing 50000 report from 20 different printers in 2 ways
1. save as PDF & print working fine.
2. Direct print is not working.

Note :- We had cross checked the Printer Default page setup too its same.

So, we can't suspect the actual problem.

Thanks in Advance.
Siva Krishna

mohana_cse06 · 2016-11-15

what do you mean by not working?
as it is 50000 series and which is a customization, you need to contact the partner..

saravanans87 · 2016-11-15

I had this issue couple years back, the root cause is when you complete your report development , try to print in 3 different ways and you may find there would be page cutoff issue. Because the horizontal/vertical spacing and page width is not properly set, it would have exceeded the stipulated size and also try to use rectangles in page header. Try the above and let me know if you still have the issues.
Read the following link for more info
http://www.archerpoint.com/blog/Posts/microsoft-dynamics-nav-2013-rdlc-reporting-rbc-attacks-part-1-10

Pre printed reports alignment is going out in Navision 2016

Answers

Categories