The specified path is invalid

vandang · 2013-02-04

Hello all,

I searched this error message on this forum but still cannot get the best solution. I got the message as above title when running the report to import the data on RTC client. This function worked fine on Server machine (both classic client and RTC) but client. Is it related to grant permission on client folder?

I work arround and if put the the file under C:\Users\Public. I will get the other error: "File C:\Users\Public\simple.txt was not found."

Thanks you for reading my threat!

mohana_cse06 · 2013-02-04

When you try to excute import function from client machine it will try to find the path given by you in servicetier installed machine.

where is your file located? in clinet machine or servicetier installed machine?

Marije_Brummel · 2013-02-04

In the RTC you should have specified if the file is handled by the Service Tier or the Client.

Have you investigated that?

http://msdn.microsoft.com/en-us/library/dd338837.aspx

vandang · 2013-02-04

mohana_cse06 wrote:

When you try to excute import function from client machine it will try to find the path given by you in servicetier installed machine.

where is your file located? in clinet machine or servicetier installed machine?

Can you help me understand your idea about "the path given by you in servicetier installed machine". The file located in client machine.Thanks!

Mark Brummel wrote:

In the RTC you should have specified if the file is handled by the Service Tier or the Client.

Have you investigated that?

http://msdn.microsoft.com/en-us/library/dd338837.aspx

Please teach me how can specfied where the file is handled by the Service Tier or the Client, I tried following the link http://msdn.microsoft.com/en-us/library/dd338641.aspx, but I face to the other error message "You do not have permission to run the codeunit 50010". Thanks you!

yukon · 2013-02-04

Hi vandang,

Pls check your license can access that range.

Regards,
Yukon

vandang · 2013-02-05

yukon wrote:

Hi vandang,

Pls check your license can access that range.

Regards,
Yukon

Thanks Yukon, the license works fine.

mohana_cse06 and Mark Brummel are correct! I found out that RTC client just can see the file on the Servicetier machine only. My solution is request IT guy create a shared folder where all users can create and modify so users can import via RTC. Is there any better solution?!

mohana_cse06 · 2013-02-05

Even though the file is located in client machine, you can upload it to temp folder of servicetier machine and import..

Check report 9172.. how they have have uploaded the file to servicetier machine..

vandang · 2013-02-05

mohana_cse06 wrote:

Even though the file is located in client machine, you can upload it to temp folder of servicetier machine and import..

Check report 9172.. how they have have uploaded the file to servicetier machine..

Thanks mohana_cse06, it worked! The short code below help me

,

IF ISSERVICETIER THEN
BEGIN
  TempFile.CREATETEMPFILE;
  FileName := TempFile.NAME + '.xml';
  TempFile.CLOSE;
  IF UPLOAD(Text001, '',Text002,'',FileName) THEN
    [mycode to insert to table here]
  CurrReport.QUIT;
END;

One more query, if I use the the request form after select the correct file, it's still show the temporary txt file and path, C:\ProgramData\Microsoft\Microsoft Dynamics NAV\60\Server\MicrosoftDynamicsNavServer\users\[user]\TEMP\__TEMP__98c972dbdd244112a2ae5c59c4969a5c.tmp.txt , so could make user confuse

mohana_cse06 · 2013-02-05

vandang wrote:

One more query, if I use the the request form after select the correct file, it's still show the temporary txt file and path, C:\ProgramData\Microsoft\Microsoft Dynamics NAV\60\Server\MicrosoftDynamicsNavServer\users\[user]\TEMP\__TEMP__98c972dbdd244112a2ae5c59c4969a5c.tmp.txt , so could make user confuse

When are you getting this message?

when you are working with RTC, it will open a new window to select the file rather than asking you to enter in request page..

try by running same report 9172

vandang · 2013-02-05

Hi mohana_cse06,

It's not a message, it just a path I copy from request page after select the .txt file.

You mean no need use request page in RTC, just open window then click Ok and run the code! It's good idea as well. Thanks!

yukon · 2013-02-05

Hi vandang,

Your are right! User confuse the link. But can use below code for file select and combine with code. You can refer NAV 2013 CU-File Management.

Var	Name	DataType	Subtype	Length
No	WindowTitle	Text		1024
No	DefaultFileName	Text		1024
No	FilterString	Text		1024

Name	DataType	Subtype	Length
OpenFileDialog	DotNet	'System.Windows.Forms, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089'.System.Windows.Forms.OpenFileDialog	
DialagResult	DotNet	'System.Windows.Forms, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089'.System.Windows.Forms.DialogResult	

Return Text - 1024
Function Name : OpenFileDialog (Add on 3-Tier Automation Mgt.)
OpenFileDialog := OpenFileDialog.OpenFileDialog;
OpenFileDialog.ShowReadOnly := FALSE;
OpenFileDialog.FileName := GetFileName(DefaultFileName);
OpenFileDialog.Title := WindowTitle;
OpenFileDialog.Filter := GetToFilterText(FilterString,DefaultFileName);
OpenFileDialog.InitialDirectory := GetDirectoryName(DefaultFileName);

DialagResult := OpenFileDialog.ShowDialog;
IF DialagResult.ToString() = 'OK' THEN
  EXIT(OpenFileDialog.FileName);
EXIT('');

How to use
txtFile := cuFileMgt.OpenFileDialog(Text50006,'',Text50007);

Noted : I use at NAV R2.
Best Regards,
Yukon

vandang · 2013-02-06

Hi yukon,

Please tell how can I apply your code

yukon · 2013-02-06

Hi vandang,

Copy below code to notepad and save. After that import to your database. Before import you need to export your object (CU - 3-Tier Automation Mgt.). Below Code i merge NAV 2013 and R2 base on my requirement.

OBJECT Codeunit 419 3-Tier Automation Mgt.
{
  OBJECT-PROPERTIES
  {
    Date=01/29/13;
    Time=[ 5:17:55 PM];
    Modified=Yes;
    Version List=NAVW16.00.01;
  }
  PROPERTIES
  {
    OnRun=BEGIN
          END;

  }
  CODE
  {
    VAR
      Text001@1004 : TextConst 'ENU=Default';
      Text004@1000000018 : TextConst 'ENU=The file %1 does not exist.';
      Text006@1003 : TextConst 'ENU=Export';
      Text007@1002 : TextConst 'ENU=Import';
      Text009@1000 : TextConst 'ENU=All Files (*.*)|*.*';
      CommonDialogMgnt@1005 : Codeunit 412;
      ClientTempPath@1006 : Text[1024];
      Text010@1000000019 : TextConst 'ENU=The file %1 has not been uploaded.';
      Text011@1000000013 : TextConst 'ENU=You must specify a source file name.;ENA=You must specify a source file name.';
      Text012@1000000012 : TextConst 'ENU=You must specify a target file name.;ENA=You must specify a target file name.';
      XMLFileType@1000000008 : TextConst 'ENU=XML Files (*.xml)|*.xml;ENA=XML Files (*.xml)|*.xml';
      WordFileType@1000000007 : TextConst 'ENU=Word Files (*.doc)|*.doc;ENA=Word Files (*.doc)|*.doc';
      Word2007FileType@1000000006 : TextConst 'ENU=Word Files (*.doc*)|*.doc*;ENA=Word Files (*.doc*)|*.doc*';
      ExcelFileType@1000000005 : TextConst 'ENU=Excel Files (*.xls)|*.xls;ENA=Excel Files (*.xls)|*.xls';
      Excel2007FileType@1000000004 : TextConst 'ENU=Excel Files (*.xls*)|*.xls*;ENA=Excel Files (*.xls*)|*.xls*';
      XSDFileType@1000000003 : TextConst 'ENU=XSD Files (*.xsd)|*.xsd;ENA=XSD Files (*.xsd)|*.xsd';
      HTMFileType@1000000002 : TextConst 'ENU=HTM Files (*.htm)|*.htm;ENA=HTM Files (*.htm)|*.htm';
      XSLTFileType@1000000001 : TextConst 'ENU=XSLT Files (*.xslt)|*.xslt;ENA=XSLT Files (*.xslt)|*.xslt';
      TXTFileType@1000000000 : TextConst 'ENU=Text Files (*.txt)|*.txt;ENA=Text Files (*.txt)|*.txt';
      PathHelper@1000000010 : DotNet "'mscorlib, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089'.System.IO.Path" RUNONCLIENT;
      ClientFileHelper@1000000009 : DotNet "'mscorlib, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089'.System.IO.File" RUNONCLIENT;
      ClientFileInfoHelper@1000000014 : DotNet "'mscorlib, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089'.System.IO.FileInfo" RUNONCLIENT;
      ServerFileHelper@1000000016 : DotNet "'mscorlib, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089'.System.IO.File";
      DirectoryHelper@1000000011 : DotNet "'mscorlib, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089'.System.IO.Directory" RUNONCLIENT;
      XSLFileType@1000000015 : TextConst 'ENU=XSL Files (*.xsl)|*.xsl;ENA=XSLT Files (*.xslt)|*.xslt';
      Text50000@1000000017 : TextConst 'ENU=Files (*.%1)|*.%1';

    PROCEDURE BLOBImport@3(VAR BLOBRef@1000 : TEMPORARY Record 99008535;Name@1002 : Text[1024];CommonDialog@1003 : Boolean) : Text[1024];
    VAR
      NVInStream@1001 : InStream;
      NVOutStream@1004 : OutStream;
    BEGIN
      IF NOT ISSERVICETIER THEN BEGIN
        IF CommonDialog THEN BEGIN
          Name := CommonDialogMgnt.OpenFileWithName(Name);
          IF STRPOS(Name,'*') > 0 THEN
            EXIT('');
        END;
        BLOBRef.Blob.IMPORT(Name,FALSE);
        EXIT(Name);
      END
      ELSE BEGIN
        //IF UPLOADINTOSTREAM(Text007,'',Text009,Name,NVInStream) THEN BEGIN
        IF UPLOADINTOSTREAM(Text007,'',GetToFilterText('',Name),Name,NVInStream) THEN BEGIN
          BLOBRef.Blob.CREATEOUTSTREAM(NVOutStream);
          COPYSTREAM(NVOutStream,NVInStream);
          EXIT(Name);
        END;
        EXIT('');
      END
    END;

    PROCEDURE BLOBExport@4(VAR BLOBRef@1002 : TEMPORARY Record 99008535;Name@1001 : Text[1024];CommonDialog@1000 : Boolean) : Text[1024];
    VAR
      NVInStream@1003 : InStream;
      ToFile@1004 : Text[1024];
      p@1005 : Integer;
      Path@1006 : Text[1024];
    BEGIN
      IF NOT ISSERVICETIER THEN
        EXIT(BLOBRef.Blob.EXPORT(Name,CommonDialog))
      ELSE BEGIN
        BLOBRef.Blob.CREATEINSTREAM(NVInStream);
        IF STRPOS(Name,'*') = 0 THEN
          ToFile := Name
        ELSE BEGIN
          ToFile := INSSTR(Name,Text001,1);
          ToFile := DELCHR(ToFile,'=','*');
        END;
        WHILE STRPOS(ToFile,'\')<>0 DO BEGIN
          p := STRPOS(ToFile,'\');
          ToFile := COPYSTR(ToFile, p+1);
        END;
        Path := 'C:\TEMP';
        IF NOT CommonDialog THEN
          Path := Magicpath;
        //DOWNLOADFROMSTREAM(NVInStream,Text006,Path,Text009,ToFile);
        DOWNLOADFROMSTREAM(NVInStream,Text006,Path,GetToFilterText('',Name),ToFile);
        EXIT(ToFile);
      END
    END;

    PROCEDURE EnvironFileName@1(PassedString@1001 : Text[250];FileExtension@1002 : Text[250]) FileName : Text[1024];
    BEGIN
      IF NOT ISSERVICETIER THEN BEGIN
        IF STRPOS(PassedString,'%1') = 0 THEN
          FileName := ENVIRON('TEMP') + PassedString + FileExtension
        ELSE
          FileName := STRSUBSTNO(ENVIRON('TEMP') + PassedString,FileExtension)
      END ELSE
        EXIT(ServerTempFileName(PassedString,FileExtension));
    END;

    PROCEDURE ServerTempFileName@5(PassedString@1001 : Text[250];FileExtension@1002 : Text[250]) FileName : Text[1024];
    VAR
      TempFile@1000 : File;
    BEGIN
      TempFile.CREATETEMPFILE;
      FileName := TempFile.NAME + '.' + FileExtension;
      TempFile.CLOSE;
    END;

    PROCEDURE ClientTempFileName@6(PassedString@1001 : Text[250];FileExtension@1002 : Text[250]) ClientFileName : Text[1024];
    VAR
      TempFile@1004 : File;
    BEGIN
      IF ISSERVICETIER THEN BEGIN
        IF ClientTempPath = '' THEN BEGIN
          TempFile.CREATETEMPFILE;
          ClientFileName := TempFile.NAME + '.' + FileExtension;
          TempFile.CLOSE;
          TempFile.CREATE(ClientFileName);
          TempFile.CLOSE;
          ClientTempPath := Path(DownloadTempFile(ClientFileName));
        END;
        ClientFileName := ClientTempPath + '\' + FORMAT(CREATEGUID) + '.' + FileExtension;
      END ELSE
        ClientFileName := ServerTempFileName(PassedString, FileExtension);
    END;

    PROCEDURE DownloadTempFile@7(ServerFileName@1001 : Text[1024]) : Text[1024];
    VAR
      FileName@1102601003 : Text[1024];
      Path@1102601004 : Text[1024];
    BEGIN
      IF NOT ISSERVICETIER THEN
        EXIT(ServerFileName);

      FileName := ServerFileName;
      Path := Magicpath;
      DOWNLOAD(ServerFileName,'',Path,Text009,FileName);
      //DOWNLOAD(ServerFileName,'',Path,GetToFilterText('',FileName),FileName);
      EXIT(FileName);
    END;

    PROCEDURE Path@8(Filename@1102601000 : Text[1024]) Path : Text[1024];
    BEGIN
      Filename := DELCHR(Filename,'<');
      Path := Filename;
      WHILE STRPOS(Filename,'\')<>0 DO BEGIN
        Filename := COPYSTR(Filename, STRPOS(Filename,'\')+1);
      END;
      IF STRLEN(Path) > STRLEN(Filename) THEN
        EXIT(COPYSTR(Path,1,STRLEN(Path)-STRLEN(Filename)))
      ELSE
        EXIT('');
    END;

    PROCEDURE Magicpath@9() : Text[1024];
    BEGIN
      EXIT('<TEMP>');   // MAGIC PATH makes sure we don't get a prompt
    END;

    PROCEDURE UploadFileSilent@1000000012(ClientFilePath@1000000000 : Text[1024]) : Text[1024];
    VAR
      ServerFileName@1000000001 : Text[1024];
      TempClientFile@1000000002 : Text[1024];
      FileName@1000000003 : Text[1024];
      FileExtension@1000000004 : Text[1024];
    BEGIN
      IF NOT ClientFileHelper.Exists(ClientFilePath) THEN
        ERROR(Text004,ClientFilePath);
      FileName := GetFileName(ClientFilePath);
      FileExtension := GetExtension(FileName);

      TempClientFile := ClientTempFileName(FileName,FileExtension);
      ClientFileHelper.Copy(ClientFilePath,TempClientFile,TRUE);

      ServerFileName := ServerTempFileName(FileName,FileExtension);

      IF NOT UPLOAD('',Magicpath,Text009,GetFileName(TempClientFile),ServerFileName) THEN
        ERROR(Text010,ClientFilePath);

      ClientFileHelper.Delete(TempClientFile);
      EXIT(ServerFileName);
    END;

    PROCEDURE DeleteClientFile@1000000004(FilePath@1000000000 : Text[1024]) : Boolean;
    BEGIN
      IF NOT ClientFileHelper.Exists(FilePath) THEN
        EXIT(FALSE);

      ClientFileHelper.Delete(FilePath);
      EXIT(TRUE);
    END;

    PROCEDURE DeleteServerFile@1000000011(FilePath@1000000000 : Text[1024]) : Boolean;
    BEGIN
      IF NOT ServerFileHelper.Exists(FilePath) THEN
        EXIT(FALSE);

      ServerFileHelper.Delete(FilePath);
      EXIT(TRUE);
    END;

    PROCEDURE CopyClientFile@1000000005(SourceFileName@1000000000 : Text[1024];DestFileName@1000000001 : Text[1024];OverWrite@1000000002 : Boolean) : Boolean;
    BEGIN
      ClientFileHelper.Copy(SourceFileName,DestFileName,OverWrite);
    END;

    PROCEDURE ClientFileExists@1000000002(FilePath@1000000000 : Text[1024]) : Boolean;
    BEGIN
      EXIT(ClientFileHelper.Exists(FilePath));
    END;

    PROCEDURE ClientDirectoryExists@1000000006(DirectoryPath@1000000000 : Text[1024]) : Boolean;
    BEGIN
      EXIT(DirectoryHelper.Exists(DirectoryPath));
    END;

    PROCEDURE ServerFileExists@1000000013(FilePath@1000000000 : Text[1024]) : Boolean;
    BEGIN
      EXIT(ServerFileHelper.Exists(FilePath));
    END;

    PROCEDURE GetToFilterText@1000000000(FilterString@1000000000 : Text[1024];FileName@1000000001 : Text[1024]) : Text[1024];
    VAR
      OutExt@1000000002 : Text[1024];
    BEGIN
      IF FilterString <> '' THEN
        EXIT(FilterString);

      CASE UPPERCASE(GetExtension(FileName)) OF
        'DOC':
          OutExt := WordFileType;
        'DOCX':
          OutExt := Word2007FileType;
        'XLS':
          OutExt := ExcelFileType;
        'XLSX':
          OutExt := Excel2007FileType;
        'XSLT':
          OutExt := XSLTFileType;
        'XML':
          OutExt := XMLFileType;
        'XSD':
          OutExt := XSDFileType;
        'HTM':
          OutExt := HTMFileType;
        'TXT':
          OutExt := TXTFileType;
        'XSL':
          OutExt := XSLFileType;
        ELSE BEGIN
          OutExt := GetExtension(FileName);
          IF OutExt<>'' THEN
            OutExt := STRSUBSTNO(Text50000,OutExt);
        END;
      END;
      IF OutExt = '' THEN
        EXIT(Text009);
      EXIT(OutExt + '|' + Text009);  // Also give the option of the general selection
    END;

    PROCEDURE GetExtension@1000000001(Name@1000000000 : Text[1024]) : Text[5];
    VAR
      FileExtension@1000000001 : Text[1024];
    BEGIN
      FileExtension := PathHelper.GetExtension(Name);
      IF FileExtension <> '' THEN
        FileExtension := DELCHR(FileExtension,'<','.');

      EXIT(FileExtension);
    END;

    PROCEDURE GetFileName@1000000008(FilePath@1000000000 : Text[1024]) : Text[1024];
    BEGIN
      EXIT(PathHelper.GetFileName(FilePath));
    END;

    PROCEDURE GetFileSize@1000000010(FilePath@1000000000 : Text[1024]) : Decimal;
    BEGIN
      IF GetFileName(FilePath)='' THEN EXIT(0);
      ClientFileInfoHelper := ClientFileInfoHelper.FileInfo(FilePath);
      EXIT(ClientFileInfoHelper.Length);
    END;

    PROCEDURE GetDirectoryName@1000000009(FileName@1000000000 : Text[1024]) : Text[1024];
    BEGIN
      IF FileName = '' THEN
        EXIT(FileName);

      FileName := DELCHR(FileName,'<');
      EXIT(PathHelper.GetDirectoryName(FileName));
    END;

    PROCEDURE OpenFileDialog@1000000014(WindowTitle@1000000000 : Text[1024];DefaultFileName@1000000001 : Text[1024];FilterString@1000000002 : Text[1024]) : Text[1024];
    VAR
      OpenFileDialog@1000000003 : DotNet "'System.Windows.Forms, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089'.System.Windows.Forms.OpenFileDialog" RUNONCLIENT;
      DialagResult@1000000004 : DotNet "'System.Windows.Forms, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089'.System.Windows.Forms.DialogResult" RUNONCLIENT;
    BEGIN
      OpenFileDialog := OpenFileDialog.OpenFileDialog;
      OpenFileDialog.ShowReadOnly := FALSE;
      OpenFileDialog.FileName := GetFileName(DefaultFileName);
      OpenFileDialog.Title := WindowTitle;
      OpenFileDialog.Filter := GetToFilterText(FilterString,DefaultFileName);
      OpenFileDialog.InitialDirectory := GetDirectoryName(DefaultFileName);

      DialagResult := OpenFileDialog.ShowDialog;
      IF DialagResult.ToString() = 'OK' THEN
        EXIT(OpenFileDialog.FileName);
      EXIT('');
    END;

    PROCEDURE SaveFileDialog@1000000015(WindowTitle@1000000002 : Text[1024];DefaultFileName@1000000001 : Text[1024];FilterString@1000000000 : Text[1024]) : Text[1024];
    VAR
      SaveFileDialog@1000000003 : DotNet "'System.Windows.Forms, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089'.System.Windows.Forms.SaveFileDialog" RUNONCLIENT;
      DialagResult@1000000004 : DotNet "'System.Windows.Forms, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089'.System.Windows.Forms.DialogResult" RUNONCLIENT;
    BEGIN
      SaveFileDialog := SaveFileDialog.SaveFileDialog;
      SaveFileDialog.CheckPathExists := TRUE;
      SaveFileDialog.OverwritePrompt := TRUE;
      SaveFileDialog.FileName := GetFileName(DefaultFileName);
      SaveFileDialog.Title := WindowTitle;
      SaveFileDialog.Filter := GetToFilterText(FilterString,DefaultFileName);
      SaveFileDialog.InitialDirectory := GetDirectoryName(DefaultFileName);

      DialagResult := SaveFileDialog.ShowDialog;
      IF DialagResult.ToString() = 'OK' THEN
        EXIT(SaveFileDialog.FileName);
      EXIT('');
    END;

    PROCEDURE OpenFolderDialog@1000000016(WindowTitle@1000000002 : Text[1024]) : Text[1024];
    VAR
      FolderDialog@1000000003 : DotNet "'System.Windows.Forms, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089'.System.Windows.Forms.FolderBrowserDialog" RUNONCLIENT;
      DialagResult@1000000004 : DotNet "'System.Windows.Forms, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089'.System.Windows.Forms.DialogResult" RUNONCLIENT;
      txtFolder@1000000000 : Text[1024];
    BEGIN
      FolderDialog := FolderDialog.FolderBrowserDialog();
      FolderDialog.ShowNewFolderButton(TRUE);
      FolderDialog.ShowDialog;
      txtFolder := FolderDialog.SelectedPath;
      EXIT(txtFolder);
    END;

    PROCEDURE IsValidFileName@1000000003(FileName@1000000000 : Text[1024]) : Boolean;
    VAR
      String@1000000001 : DotNet "'mscorlib, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089'.System.String" RUNONCLIENT;
      String2@1000000002 : Code[10];
    BEGIN
      EXIT(TRUE);
      IF FileName = '' THEN
        EXIT(FALSE);


      IF String.IndexOfAny(PathHelper.GetInvalidFileNameChars) <> -1 THEN
        EXIT(FALSE);

      //String := GetDirectoryName(FileName);
      String.Copy(GetDirectoryName(FileName));
      IF String.IndexOfAny(PathHelper.GetInvalidPathChars) <> -1 THEN
        EXIT(FALSE);

      EXIT(TRUE);
    END;

    PROCEDURE ValidateFileNames@1000000007(ServerFileName@1000000000 : Text[1024];ClientFileName@1000000001 : Text[1024]);
    BEGIN
      IF NOT IsValidFileName(ServerFileName) THEN
        ERROR(Text011);

      IF NOT IsValidFileName(ClientFileName) THEN
        ERROR(Text012);
    END;

    BEGIN
    END.
  }
}

How to use
txtFile := cuFileMgt.OpenFileDialog('File Select','','*.xml' <Depend on you>);

Regards,
Yukon

vandang · 2013-02-06

Thanks you Yukon, it works :thumbsup:

yukon · 2013-02-06

Hi vandang,

If you don't mind, please change your post status to "Solved".

Regards,
Yukon

vandang · 2013-02-18

Thanks Yukon!

Mammo · 2013-09-12

Guys,

I got the same error and got the solution by following below steps;

1. Stop the NAV Business Web Server service
2. Stop the Microsoft Dynamics NAV server service
3. Select the all tables containing 2000000071 till 2000000075 and compile them by pressing F11
4. Start both the services which stopped in Step 1 & Step 2.

Hope it will help.

The specified path is invalid

Answers

Categories